Mitsubishi Pajero Extractors - NP NS NW V6 3.8L 6G75 Sept 2006
MPI AutomotiveRRP$1752.34Mitsubishi Pajero Extractors - NP NS NW V6 3.8L 6G75 Sept 2006 on - includes catalytic converters (SKU.
View partFX-462
Mitsubishi Magna TR, TS 3.0L V6 Single Cam including Flex & Y-pipe EARLY Model Extractor
Mitsubishi Magna TR, TS 3.0L V6 Single Cam including Flex & Y-pipe EARLY Model Extractor.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $1459.21 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- FX-462
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Mitsubishi
- Stock status
- In stock at supplier
The MPI Automotive FX-462 is an extractor set listed to fit the early-model Mitsubishi Magna (TR/TS) 3.0L V6 single-cam, and it includes the flex section and Y-pipe. It replaces the factory manifold and the collector pipework that joins the two banks.
What's an extractor and what does this set include?
An extractor replaces the cast manifold at the cylinder head with tubular runners, one per port, that merge downstream rather than sharing a single casting — a change aimed at reducing the back-pressure the engine works against on the exhaust stroke. On a V6 the two banks then need joining, and that's what the included Y-pipe does, with a flex section to take up engine movement and heat expansion. So the FX-462 is a head-end package: extractors, the Y-pipe collector and the flex joint together, ready to tie into the rest of the system.
What does 'early model' mean here?
The listing calls this the early-model set for the TR/TS Magna V6 single-cam, which is how MPI separates it from later Magna sets that run different routing. Single-cam is the engine detail that pins it down. Tube diameter, material and finish aren't published by the supplier in this listing, so we'd confirm those with MPI Automotive at order time rather than state figures the record doesn't give.
Will it suit my Magna?
It's listed to fit the early TR/TS Magna 3.0 V6 single-cam. The Magna ran more than one V6 across its life, so the cam type and series are the things that decide whether this set lines up. Give us your year and engine detail and we'll match it to the listing — fitment is listed-to-fit, not guaranteed, because feed data can be imperfect and only the actual car settles it.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits Magna extractor sets in-house across the Illawarra. With the Y-pipe and flex included, the job covers the manifold swap and the join back to the system, sealing each flange with fresh gaskets. Send us your Magna's details and we'll confirm the FX-462 is right for your variant before booking the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Does the FX-462 include the Y-pipe and flex?
- Yes — this set includes both the Y-pipe and a flex section along with the extractors, covering the manifold and the collector that joins the two banks.
- Which Magna does it suit?
- It's listed for the early-model TR/TS Magna 3.0 V6 single-cam. Confirm your engine and series with the workshop before ordering.
- What size are the tubes?
- Tube diameter isn't published by the supplier in this listing. We can confirm it with MPI Automotive when you order through us.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Mitsubishi MK Triton V6 3.0LR SOHC 24V 6G72 4WD/2WD 1996 - SEPT 2004
MPI AutomotiveRRP$1525.22Mitsubishi MK Triton V6 3.0LR SOHC 24V 6G72 4WD/2WD 1996 - SEPT 2004 includes Y Pipe, Flex Extractor.
View part
Mitsubishi Lancer CJ 2.0L, 2.4L Engine 4B11, 4B12, 2008 Onwards
MPI AutomotiveRRP$1303.45Mitsubishi Lancer CJ 2.0L, 2.4L Engine 4B11, 4B12, 2008 Onwards Extractor (FX-422) Fits MITSUBISHI.
View part
Mitsubishi Triton ML 2.4L 4G64 16V EFI 2WD 2006-Current Manifold
MPI AutomotiveRRP$1295.76Mitsubishi Triton ML 2.4L 4G64 16V EFI 2WD 2006-Current Manifold Replacement Includes Cat Direct Fit.
View part
Mitsubishi NM, NJ, NP Pajero V6 3.5L - 3.8L May 2000 on, Cat
MPI AutomotiveRRP$1105.08Mitsubishi NM, NJ, NP Pajero V6 3.5L - 3.8L May 2000 on, Cat on Passenger Side Extractor 6G74.
View part
Mitsubishi MK Triton V6 3.0L SOHC 24V 6G72 4WD/2WD 1996-SEPT 2004
MPI AutomotiveRRP$1092.88Mitsubishi MK Triton V6 3.0L SOHC 24V 6G72 4WD/2WD 1996-SEPT 2004 (Inc Y Pipe, Direct Fit) Extractor (SKU.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.