Mitsubishi Pajero Extractors - NP NS NW V6 3.8L 6G75 Sept 2006
MPI AutomotiveRRP$1752.34Mitsubishi Pajero Extractors - NP NS NW V6 3.8L 6G75 Sept 2006 on - includes catalytic converters (SKU.
View partFX-436
Mitsubishi Triton ML 2.4L 4G64 16V EFI 2WD 2006-Current Manifold Replacement Includes
Mitsubishi Triton ML 2.4L 4G64 16V EFI 2WD 2006-Current Manifold Replacement Includes Cat Direct Fit.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $1295.76 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- FX-436
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Mitsubishi
- Stock status
- In stock at supplier
The MPI Automotive FX-436 is a direct-fit manifold replacement that includes the catalytic converter, listed to fit the Mitsubishi Triton ML 2.4L 4G64 16V EFI 2WD from 2006. It replaces the factory manifold-and-cat assembly on that ute as a bolt-in unit.
What is this manifold replacement and what does it cover?
The FX-436 is a manifold replacement, the section that bolts to the cylinder head and carries the exhaust away from the engine, supplied here as a direct-fit unit that includes the catalytic converter. Because it is described as direct-fit, it is made to bolt in where the factory part came out rather than needing fabrication. It covers the manifold-and-cat stage at the front of the system on the 2.4L Triton; it is not a cat-back and does not change the rear of the exhaust.
Does it keep the catalytic converter?
Yes. The FX-436 includes the catalytic converter, so the emissions hardware that sits at this point in the system stays in place rather than being removed. That is the key difference from a cat-delete part: this is a replacement for the factory manifold-and-cat assembly that retains the cat. Confirm the exact build and any state requirements with the workshop before fitting.
Will it suit my Triton?
The FX-436 is listed to fit the Mitsubishi Triton ML 2.4L 4G64 16V EFI 2WD from 2006. Because it is engine- and drivetrain-specific, confirm your exact engine, year and 2WD configuration with the workshop before ordering rather than going on the Triton name alone.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits direct-fit manifolds like the FX-436 in-house across the Illawarra. The job means removing the factory manifold-and-cat assembly, fresh gaskets on reassembly, and checking the unit seats cleanly. Supplied by MPI Automotive at $1,295.76 AUD; send us your Triton's details and we will confirm the fit and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What does the FX-436 fit?
- It is listed to fit the Mitsubishi Triton ML 2.4L 4G64 16V EFI 2WD from 2006. Confirm your exact engine, year and drivetrain with the workshop before ordering.
- Does it include the catalytic converter?
- Yes. It is a direct-fit manifold replacement that includes the cat, so the factory emissions hardware at this point in the system stays in place.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Mitsubishi MK Triton V6 3.0LR SOHC 24V 6G72 4WD/2WD 1996 - SEPT 2004
MPI AutomotiveRRP$1525.22Mitsubishi MK Triton V6 3.0LR SOHC 24V 6G72 4WD/2WD 1996 - SEPT 2004 includes Y Pipe, Flex Extractor.
View part
Mitsubishi Magna TR, TS 3.0L V6 Single Cam including Flex & Y-pipe EARLY
MPI AutomotiveRRP$1459.21Mitsubishi Magna TR, TS 3.0L V6 Single Cam including Flex & Y-pipe EARLY Model Extractor.
View part
Mitsubishi Lancer CJ 2.0L, 2.4L Engine 4B11, 4B12, 2008 Onwards
MPI AutomotiveRRP$1303.45Mitsubishi Lancer CJ 2.0L, 2.4L Engine 4B11, 4B12, 2008 Onwards Extractor (FX-422) Fits MITSUBISHI.
View part
Mitsubishi NM, NJ, NP Pajero V6 3.5L - 3.8L May 2000 on, Cat
MPI AutomotiveRRP$1105.08Mitsubishi NM, NJ, NP Pajero V6 3.5L - 3.8L May 2000 on, Cat on Passenger Side Extractor 6G74.
View part
Mitsubishi MK Triton V6 3.0L SOHC 24V 6G72 4WD/2WD 1996-SEPT 2004
MPI AutomotiveRRP$1092.88Mitsubishi MK Triton V6 3.0L SOHC 24V 6G72 4WD/2WD 1996-SEPT 2004 (Inc Y Pipe, Direct Fit) Extractor (SKU.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.