Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7707.93Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View partEMG206
Windsor EFI Large Port 351 V8 Ford Extractor Gasket
MPI Automotive Windsor EFI Large Port 351 V8 Ford Extractor Gasket.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $33.77 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- EMG206
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Stock status
- In stock at supplier
The MPI Automotive EMG206 is an extractor/manifold gasket listed to fit the Ford 351 Windsor EFI V8 with the large-port head. It's the flange seal between the cylinder head and the extractor or factory manifold, not the header itself.
What does this gasket cover?
The EMG206 is the exhaust-face gasket for the large-port 351 Windsor V8 in EFI form. It seals each side of the vee where the extractor or factory manifold bolts to the head, so combustion gas stays in the runner rather than escaping at the flange. It is cut to the large-port Windsor pattern specifically — the port window matters on these heads, so a gasket sized to the small-port version isn't the right seal for this one.
What is an extractor gasket and what does it do?
An extractor gasket is the replaceable seal between the cylinder head and the exhaust extractor or manifold. Exhaust leaves the head hot and under pressure, so the joint needs a gasket that keeps its shape through repeated heat cycles. On a V8 you're sealing two banks, so each side gets its own gasket. They're renewed whenever you fit extractors, change a manifold, or pull a head — a leaking one tends to tick or hiss under load. It's a routine sealing item, not a performance part on its own.
Will it suit my 351 Windsor Ford?
The EMG206 is listed to fit the Ford 351 Windsor EFI V8 with large-port heads. Port size is the deciding factor here, so the key check is whether your engine runs the large-port casting rather than the small-port one. The supplier hasn't published a year or model list, so confirm your head and flange with the workshop before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits Windsor V8 extractors and gaskets in-house across the Illawarra. The job means cleaning both faces, confirming the head is the large-port type, checking the flange is flat, and torquing the fasteners evenly so neither side of the vee is pinched. The EMG206 is supplied by MPI Automotive at an RRP of $33.77; contact us to confirm fitment and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What engine does the EMG206 suit?
- It's listed to fit the Ford 351 Windsor EFI V8 with the large-port head. Confirm your head casting and flange with the workshop before ordering.
- Does large-port versus small-port matter?
- Yes — this gasket is cut to the large-port Windsor pattern, so check which heads your engine runs before ordering.
- Can you fit it for me?
- Yes. Oak Flats Muffler Men fits Windsor V8 gaskets and extractors in-house in the Illawarra; contact us to book.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7262.11MPI Automotive Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View part
Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7102.89Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0237) Engineered. Quality guaranteed.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7058.57Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0124) Engineered. Quality guaranteed.
View part
Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7030.42Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler/Muffler.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler
MPI AutomotiveRRP$7003.03MPI Automotive Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.