Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7707.93Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View partFDS001
Zinc Steel Stud, Thread 7/16" UNC, Total OA Length 58mm, Thread Length 33mm & 12mm, Suit
Zinc Steel Stud, Thread 7/16" UNC, Total OA Length 58mm, Thread Length 33mm & 12mm, Suit Ford Falcon for selected vehicle applications.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $3.45 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- FDS001
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Stock status
- In stock at supplier
The MPI Automotive FDS001 is a zinc-plated steel stud with a 7/16 UNC thread, listed to suit the Ford Falcon. It measures 58mm overall, with threaded lengths of 33mm and 12mm at each end.
What is this stud and where does it go?
This is exhaust hardware rather than a pipe or extractor: a threaded stud that anchors a manifold, extractor or flange joint to the head or the next section in the system. The FDS001 runs a 7/16 UNC thread, the imperial coarse thread common on older Australian sixes and V8s, and is zinc-plated for a measure of corrosion resistance in the heat and grime under the car.
What are the dimensions?
Overall it is 58mm long. One end carries 33mm of thread and the other 12mm, which is the figure that decides how the stud seats and how much engagement you get into the casting versus the nut side. Those are the only measurements the supplier publishes for this part; material grade beyond zinc-plated steel and any torque figure are not listed.
Will it suit my Ford Falcon?
It is listed to fit the Ford Falcon. Because a stud like this is defined by its thread and length rather than a model year, the deciding factor is whether your manifold or extractor flange uses the 7/16 UNC pattern and needs this engagement. Confirm the exact build with the workshop before ordering.
What does fitting involve at our Illawarra workshop?
Studs are usually replaced when an extractor or manifold is off the car, an old stud has stretched, seized or snapped. Oak Flats Muffler Men can supply the FDS001 and fit it as part of an extractor or exhaust job here in the Illawarra, checking the thread match and that the stud pulls up cleanly before the joint goes back together.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What thread does the FDS001 use?
- It is a 7/16 UNC thread. Match it to your manifold or extractor flange before ordering, or ask the workshop to confirm.
- How long is this stud?
- 58mm overall, with 33mm of thread on one end and 12mm on the other.
- Can the workshop fit it for me?
- Yes. Oak Flats Muffler Men can supply and fit the FDS001 as part of an extractor or exhaust job in the Illawarra.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7262.11MPI Automotive Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View part
Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7102.89Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0237) Engineered. Quality guaranteed.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7058.57Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0124) Engineered. Quality guaranteed.
View part
Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7030.42Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler/Muffler.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler
MPI AutomotiveRRP$7003.03MPI Automotive Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.