Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7707.93Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View partFX-137DFHPC-S
Ford Laser KN 1.8L DOHC Direct Fit Extractor - Ceramic Coated (Silver)
Ford Laser KN 1.8L DOHC Direct Fit Extractor - Ceramic Coated (Silver).
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $1133.47 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- FX-137DFHPC-S
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Ford
- Stock status
- In stock at supplier
The MPI Automotive FX-137DFHPC-S is a silver ceramic-coated direct-fit extractor listed to fit the Ford Laser KN 1.8L DOHC. It is the coated version of the FX-137DF header, built to bolt into the factory location.
What is a direct-fit extractor?
An extractor, or header, replaces the factory cast exhaust manifold with separate tubes that merge downstream, easing the back-pressure a cast manifold creates so each cylinder breathes out more freely. The DF in the part number marks a direct-fit design, meaning it is built to bolt into the factory location rather than needing modification to mount. On the Laser KN's 1.8L DOHC four it sits at the head as the first exhaust step and does not change the muffler or tailpipe behind it.
What does the ceramic coating add?
The HPC-S in the part number marks the silver ceramic-coated finish. A ceramic coating is applied to the tube surface mainly to manage heat and surface durability compared with a bare header. Beyond the finish this is the same direct-fit header as the uncoated FX-137DF listed for the Laser KN 1.8L DOHC, so the application is the same — the difference is the coating, not the design.
Will it suit my Laser KN?
It's listed to fit the Ford Laser KN with the 1.8L DOHC engine. The KN range used more than one engine, so confirm you have the 1.8L DOHC and check your exact build with the workshop before ordering to be sure this is the right header.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits coated direct-fit extractors like the FX-137DFHPC-S in-house across the Illawarra. Because it is a direct-fit design it mounts in the factory location; we still match the flange, sort gaskets and clearance, and join it into the system. The recommended retail is $1,133.47. An extractor sits ahead of the emissions hardware, so confirm any compliance requirements for your Laser with us before fitting.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What does 'direct-fit' mean here?
- It's built to bolt into the factory location on the Laser KN 1.8L DOHC, so it mounts where the original manifold sat without modification to fit.
- How is the FX-137DFHPC-S different from the FX-137DF?
- It's the same direct-fit Laser KN header with a silver ceramic coating. The FX-137DF is the uncoated version.
- Which engine does it suit?
- It's listed for the Laser KN 1.8L DOHC. Confirm your engine and build with the workshop before ordering.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7262.11MPI Automotive Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View part
Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7102.89Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0237) Engineered. Quality guaranteed.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7058.57Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0124) Engineered. Quality guaranteed.
View part
Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7030.42Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler/Muffler.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler
MPI AutomotiveRRP$7003.03MPI Automotive Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.