Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7707.93Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View partFX-165
Ford Cortina TD TE TF, F100, Bronco 6cyl 200-250 4.1L Extractor Crossflow & Iron Head
Ford Cortina TD TE TF, F100, Bronco 6cyl 200-250 4.1L Extractor Crossflow & Iron Head can use FX-166 (SKU.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $699.52 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- FX-165
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Ford
- Stock status
- In stock at supplier
The MPI Automotive FX-165 is an extractor set listed to fit the Ford Cortina TD, TE and TF, plus the F100 and Bronco, with the six-cylinder 200, 250 and 4.1L crossflow and iron-head engines. The listing notes the FX-166 can also be used for this application.
What is an extractor and what does it do?
An extractor, or header, replaces the cast factory exhaust manifold with separate tuned-length tubes that merge further down. The aim is to cut the back-pressure a compact cast manifold creates so each cylinder breathes out more freely. On an older Ford six like the 200, 250 or 4.1L it is a common first exhaust step. It bolts on at the cylinder head and does not change the mufflers or tailpipe behind it.
Will it suit my Cortina, F100 or Bronco?
The FX-165 is listed to fit the Ford Cortina TD, TE and TF, the F100 and the Bronco with the six-cylinder 200, 250 or 4.1L crossflow and iron-head engines. The listing also notes the FX-166 can be used for this application. Head castings varied across this family, so confirm your exact engine and head with the workshop before ordering.
Is it road legal?
An extractor changes the manifold ahead of the emissions hardware, so fitment can have compliance implications depending on the vehicle and how it is presented for registration. We have no published compliance detail for this part, so confirm the requirements for your Ford with the workshop before fitting.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits extractors like the FX-165 in-house across the Illawarra. We match the flange to your head, sort gaskets and clearance, and tie it into the rest of the system. The recommended retail is $699.52. Tell us your model and engine and we'll confirm the right part and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Can I use the FX-166 instead?
- The listing notes the FX-166 can be used for this application. Confirm which suits your exact build with the workshop.
- Will the FX-165 fit my Cortina TE?
- It's listed to fit the Cortina TD, TE and TF along with the F100 and Bronco on the 200, 250 or 4.1L six. Confirm your head type first.
- Is it crossflow or iron head?
- It's listed for both the crossflow and iron-head versions of these sixes. Confirm your head with the workshop before ordering.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7262.11MPI Automotive Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View part
Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7102.89Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0237) Engineered. Quality guaranteed.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7058.57Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0124) Engineered. Quality guaranteed.
View part
Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7030.42Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler/Muffler.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler
MPI AutomotiveRRP$7003.03MPI Automotive Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.