Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7707.93Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View partFX-193HPC-S
Ford F100 - 250 302 - 351 2V Cleveland 4WD only 1974 - 1979 Extractor - Ceramic Coated
MPI Automotive Ford F100 - 250 302 - 351 2V Cleveland 4WD only 1974 - 1979 Extractor - Ceramic Coated (Silver).
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $1377.41 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- FX-193HPC-S
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Ford
- Stock status
- In stock at supplier
The MPI Automotive FX-193HPC-S is a ceramic-coated extractor set listed to fit the 4WD-only Ford F100/F250 with the 302 or 351 2V Cleveland V8, 1974 to 1979. RRP is $1377.41.
What does an extractor set actually do?
Extractors, also called headers, swap the cast factory exhaust manifold for individual tubed runners — one per cylinder — that merge into a collector. On a V8 like the 302 or 351 2V Cleveland, the aim is to let each cylinder's exhaust pulse leave more freely than a shared cast manifold allows, which is where the breathing gain comes from. It's the on-engine half of the exhaust, ahead of whatever pipework and muffler the truck runs behind it.
What's the ceramic-coated silver finish for?
This set carries a silver ceramic coating, which is the "HPC-S" in the part number. A ceramic coating is applied to extractors mainly to manage surface heat and resist corrosion compared with bare steel. MPI hasn't published the tube diameter or the underlying material, so we confirm those against the actual part rather than quote figures we don't hold — the coating is the published detail here, not the dimensions.
Will it suit my Ford F100 or F250?
It's listed to fit the 4WD-only Ford F100/F250 with the 302 or 351 2V Cleveland V8, 1974 to 1979. The 4WD-only note matters: the bare FX-193 covers the same trucks without the coating, but neither is a 2WD set. Listing data on parts this age can be imperfect, so send us your exact model, engine and build and we'll confirm the FX-193HPC-S is the right set before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits ceramic-coated extractor sets like this in our Illawarra workshop. On a 4WD truck this age it's as much about clearance as fitment: we check the FX-193HPC-S on the hoist, confirm the runners clear the chassis, steering and front diff, sort the gaskets and the join to your pipework, then book the bay. Any spec MPI hasn't published, like tube diameter, is what that check settles before we order at the $1377.41 RRP.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Will the FX-193HPC-S fit my Ford F100?
- It's listed to fit the 4WD-only Ford F100/F250 with the 302 or 351 2V Cleveland V8, 1974 to 1979. Listings on parts this old can be imperfect, so confirm your exact model, engine and build with the workshop before ordering.
- What's the difference between this and the FX-193?
- The FX-193HPC-S carries a silver ceramic coating; the plain FX-193 is the same extractor set for the same trucks without that coating.
- How much is it?
- The RRP is $1377.41. We'll confirm the final figure once we've matched the FX-193HPC-S to your build at the Oak Flats workshop.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7262.11MPI Automotive Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View part
Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7102.89Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0237) Engineered. Quality guaranteed.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7058.57Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0124) Engineered. Quality guaranteed.
View part
Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7030.42Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler/Muffler.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler
MPI AutomotiveRRP$7003.03MPI Automotive Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.