Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7707.93Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View partFX-216
Ford FG Supercharged V8 5.0L 4 - 1, 1 7/8in Primary, 3in Outlet Extractor
Ford FG Supercharged V8 5.0L 4 - 1, 1 7/8in Primary, 3in Outlet Extractor (suits SSMBC216).
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $1545.47 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- FX-216
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Ford
- Stock status
- In stock at supplier
The MPI Automotive FX-216 is a 4-into-1 extractor set with 1-7/8in primaries and a 3in outlet, listed to fit the Ford FG supercharged V8 5.0L and made to suit the SSMBC216 system. It replaces the factory manifolds on that car with tubular runners.
What are extractors and what does this set change?
Extractors, also called headers, replace the cast factory exhaust manifolds with separate tubular runners off each cylinder. The FX-216 is a 4-into-1 layout, with four primaries merging into one collector, using 1-7/8in primary tubes and a 3in outlet. The aim is to let the engine breathe out with less restriction than the cast manifolds; it is a change to the exhaust side of the engine rather than an internal part, and it forms the front of the system.
Why does it reference the SSMBC216?
The FX-216 is listed to suit the SSMBC216 system, so it is designed as the matching front end for that cat-back rather than a standalone change. The 3in outlet is the figure that ties them together: the extractor finishes at 3in so the SSMBC216 pipework mates cleanly behind it. Pairing the parts as intended is how the 1-7/8in primaries and 3in outlet line up with the rest of the run on the supercharged 5.0L.
Will it suit my FG V8?
The FX-216 is listed to fit the Ford FG supercharged V8 5.0L. Because it is built around the SSMBC216 system, confirm your exact engine and the rest of your exhaust setup with the workshop before ordering rather than going on the FG badge alone.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits extractors like the FX-216 in-house across the Illawarra. The job needs access to drop the factory manifolds, fresh gaskets on reassembly, and the 3in outlet matched to the SSMBC216 pipework behind it. Supplied by MPI Automotive at $1,545.47 AUD; send us your FG's details and we will confirm the fit and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What does the FX-216 fit?
- It is listed to fit the Ford FG supercharged V8 5.0L and is made to suit the SSMBC216 system. Confirm your exact engine and setup with the workshop before ordering.
- What size are the extractors?
- They are a 4-into-1 set with 1-7/8in primary tubes and a 3in outlet.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7262.11MPI Automotive Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View part
Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7102.89Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0237) Engineered. Quality guaranteed.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7058.57Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0124) Engineered. Quality guaranteed.
View part
Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7030.42Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler/Muffler.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler
MPI AutomotiveRRP$7003.03MPI Automotive Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.