Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7707.93Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View partFX-217LHD
Ford Mustang 289 - 302 Windsor Interference 1964 on Manual and Auto LHD
Ford Mustang 289 - 302 Windsor Interference 1964 on Manual and Auto LHD (Not Mech Clutch) Extractor.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $1628.98 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- FX-217LHD
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Ford
- Stock status
- In stock at supplier
The FX-217LHD is a set of extractors listed to fit the left-hand-drive Ford Mustang from 1964 with the 289/302 Windsor V8, in both manual and automatic. It's the interference-pattern set and is not suitable for cars running a mechanical clutch.
What does this header set cover?
This is a tubular extractor set that replaces the cast factory exhaust manifolds on the early Windsor-powered Mustang. It's specifically the left-hand-drive (LHD) fitment, listed for the 289 and 302 Windsor V8 from 1964 onward, and is flagged as an interference design — meaning it's routed to clear surrounding components on that chassis. The listing also notes it is not for cars with a mechanical clutch, an important compatibility line to read before ordering.
What are extractors and what do they change?
Extractors, or headers, swap the restrictive cast manifolds for individual tuned tubes that merge downstream, giving each cylinder a clearer path to scavenge spent gas. On a vintage V8 like the Windsor that's the classic first step in freeing up the exhaust side. They change how the engine breathes and how it sounds rather than adding any guaranteed figure, and the rest of the system behind them still does its job.
Will it suit my Mustang?
It's listed to fit the LHD Ford Mustang 289/302 Windsor (1964 on), manual or auto, but not mechanical-clutch cars and not as an interference-incompatible swap. Mustangs of this era vary widely with engine and driveline changes, so confirm your exact build and clutch type with the workshop before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits classic header sets like this in-house. We check the bellhousing and clutch arrangement, steering and chassis clearances on the LHD layout, and the join back into the existing pipework. The MPI Automotive RRP is listed at $1,628.98; it can be a special-order item, so talk to us and we'll confirm availability and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Does the FX-217LHD suit a mechanical-clutch Mustang?
- No. This set is listed as not for cars running a mechanical clutch. Check your clutch arrangement with the workshop before ordering.
- Is this the left-hand-drive fitment?
- Yes — the FX-217LHD is the LHD set for the Ford Mustang 289/302 Windsor from 1964. Confirm your exact build with us first.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7262.11MPI Automotive Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View part
Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7102.89Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0237) Engineered. Quality guaranteed.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7058.57Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0124) Engineered. Quality guaranteed.
View part
Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7030.42Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler/Muffler.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler
MPI AutomotiveRRP$7003.03MPI Automotive Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.