Mitsubishi Pajero Extractors - NP NS NW V6 3.8L 6G75 Sept 2006
MPI AutomotiveRRP$1752.34Mitsubishi Pajero Extractors - NP NS NW V6 3.8L 6G75 Sept 2006 on - includes catalytic converters (SKU.
View partFX-427
Mitsubishi Lancer 1992-96, 1.8L, 4G93 Eng, CC Sedan/Coupe, CC - CE Wagon Extractor
Mitsubishi Lancer 1992-96, 1.8L, 4G93 Eng, CC Sedan/Coupe, CC - CE Wagon Extractor (SKU: FX-427) Engineered.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $424.11 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- FX-427
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Mitsubishi
- Stock status
- In stock at supplier
The MPI Automotive FX-427 is a set of extractors listed to fit the Mitsubishi Lancer 1.8L 4G93, covering the CC sedan and coupe and the CC/CE wagon, 1992 to 1996. It replaces the factory exhaust manifold at the head.
What's an extractor and where does it sit?
An extractor, or header, replaces the cast manifold bolted to the cylinder head with a tubular set, running a tube from each port that merges downstream rather than sharing a single casting — the aim being to reduce the back-pressure the engine pushes against as it clears spent gas. It's the very first component in the exhaust, right at the engine, with everything else carrying on behind it. On the four-cylinder 4G93 that's a single tubular set, and it changes how the engine breathes at the head without touching its capacity or fuelling.
What body styles does the FX-427 cover?
This set is matched to the 1.8L 4G93 engine, and the listing covers that engine across the CC sedan, the coupe and the CC/CE wagon — the same engine and head shared across those body styles, so one set suits them all. It's the engine and head, not the body, that decides the fit. Tube diameter, material and finish aren't published by the supplier here, so we'd confirm those with MPI Automotive at order time rather than assume them.
Will it suit my Lancer?
It's listed to fit the 1.8L 4G93 Lancer in CC sedan, coupe and CC/CE wagon form, 1992 to 1996. The Lancer of this era came with more than one engine, so confirm yours is the 1.8 4G93 before ordering. Give us your engine, body style and year and we'll match it to the listing — fitment is listed-to-fit, not guaranteed, because feed data can be imperfect.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits Lancer extractor sets in-house across the Illawarra. The job means unbolting the old manifold from the head, sealing the new set with fresh gaskets and confirming it ties cleanly into the existing pipework. Send us your Lancer's engine and body details and we'll verify the FX-427 before booking the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Does the FX-427 fit the wagon as well as the sedan?
- Yes — it's listed for the 1.8L 4G93 across the CC sedan, coupe and CC/CE wagon, 1992 to 1996, because they share the engine. Confirm your engine with the workshop.
- Is this a complete exhaust?
- No. It's the extractor set that replaces the manifold at the head only. The pipework and muffler behind it are separate.
- What material are the extractors?
- Material isn't published by the supplier in this listing. We can confirm it with MPI Automotive when you order through us.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Mitsubishi MK Triton V6 3.0LR SOHC 24V 6G72 4WD/2WD 1996 - SEPT 2004
MPI AutomotiveRRP$1525.22Mitsubishi MK Triton V6 3.0LR SOHC 24V 6G72 4WD/2WD 1996 - SEPT 2004 includes Y Pipe, Flex Extractor.
View part
Mitsubishi Magna TR, TS 3.0L V6 Single Cam including Flex & Y-pipe EARLY
MPI AutomotiveRRP$1459.21Mitsubishi Magna TR, TS 3.0L V6 Single Cam including Flex & Y-pipe EARLY Model Extractor.
View part
Mitsubishi Lancer CJ 2.0L, 2.4L Engine 4B11, 4B12, 2008 Onwards
MPI AutomotiveRRP$1303.45Mitsubishi Lancer CJ 2.0L, 2.4L Engine 4B11, 4B12, 2008 Onwards Extractor (FX-422) Fits MITSUBISHI.
View part
Mitsubishi Triton ML 2.4L 4G64 16V EFI 2WD 2006-Current Manifold
MPI AutomotiveRRP$1295.76Mitsubishi Triton ML 2.4L 4G64 16V EFI 2WD 2006-Current Manifold Replacement Includes Cat Direct Fit.
View part
Mitsubishi NM, NJ, NP Pajero V6 3.5L - 3.8L May 2000 on, Cat
MPI AutomotiveRRP$1105.08Mitsubishi NM, NJ, NP Pajero V6 3.5L - 3.8L May 2000 on, Cat on Passenger Side Extractor 6G74.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.