Mitsubishi Pajero Extractors - NP NS NW V6 3.8L 6G75 Sept 2006
MPI AutomotiveRRP$1752.34Mitsubishi Pajero Extractors - NP NS NW V6 3.8L 6G75 Sept 2006 on - includes catalytic converters (SKU.
View partFX-429DF
Mitsubishi Lancer CH, LH 2.4L 4G69, AUG 05 - 08 (Direct Fit) Extractor
Mitsubishi Lancer CH, LH 2.4L 4G69, AUG 05 - 08 (Direct Fit) Extractor.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $687.83 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- FX-429DF
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Mitsubishi
- Stock status
- In stock at supplier
The MPI Automotive FX-429DF is a direct-fit extractor set listed to fit the Mitsubishi Lancer (CH/LH) 2.4L 4G69, August 2005 to 2008. It replaces the factory exhaust manifold at the head with a tubular extractor design.
What's an extractor and what does it change?
An extractor, or header, replaces the cast manifold bolted to the cylinder head with a tubular set, giving each port its own runner before they merge — the aim being to reduce the back-pressure the engine works against as it clears spent gas. It's the first item in the exhaust, sitting right at the engine, with the rest of the system behind it. On the four-cylinder 4G69 that's a single tubular set. It's a head-end breathing change only; it doesn't alter the engine's capacity or fuelling.
What does the DF (direct-fit) code mean?
The DF in FX-429DF marks this as the direct-fit version, built to bolt up to the factory mounting points without bench modification — useful on a later Lancer where the engine bay is tighter and clean factory points save time. It's specified for the CH/LH Lancer with the 2.4 4G69, which pins down the engine. Tube diameter, material and finish aren't published by the supplier here, so we'd confirm those with MPI Automotive at order time rather than state figures the record doesn't give.
Will it suit my Lancer?
It's listed to fit the CH/LH Lancer 2.4L 4G69, August 2005 to 2008. The Lancer ran several engines across these series, so the 2.4 4G69 detail and the build date are the things to confirm against your actual car. Send us your engine and year and we'll match it to the listing — fitment is listed-to-fit, not guaranteed, because feed data can be imperfect.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits Lancer extractor sets in-house across the Illawarra. The job means unbolting the old manifold from the head, sealing the new set with fresh gaskets and confirming it ties cleanly into the existing pipework. Send us your Lancer's engine and year and we'll verify the FX-429DF before booking the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Which Lancer does the FX-429DF suit?
- It's listed for the CH/LH Lancer 2.4L 4G69, August 2005 to 2008. Confirm your engine and year with the workshop, as the Lancer came with more than one engine.
- What does direct-fit mean here?
- It's designed to bolt to the factory mounting points without modification. We still check the fit on your vehicle when it's in the bay.
- Is this a complete exhaust?
- No. It's the extractor set that replaces the manifold at the head. The pipework and muffler behind it are separate.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Mitsubishi MK Triton V6 3.0LR SOHC 24V 6G72 4WD/2WD 1996 - SEPT 2004
MPI AutomotiveRRP$1525.22Mitsubishi MK Triton V6 3.0LR SOHC 24V 6G72 4WD/2WD 1996 - SEPT 2004 includes Y Pipe, Flex Extractor.
View part
Mitsubishi Magna TR, TS 3.0L V6 Single Cam including Flex & Y-pipe EARLY
MPI AutomotiveRRP$1459.21Mitsubishi Magna TR, TS 3.0L V6 Single Cam including Flex & Y-pipe EARLY Model Extractor.
View part
Mitsubishi Lancer CJ 2.0L, 2.4L Engine 4B11, 4B12, 2008 Onwards
MPI AutomotiveRRP$1303.45Mitsubishi Lancer CJ 2.0L, 2.4L Engine 4B11, 4B12, 2008 Onwards Extractor (FX-422) Fits MITSUBISHI.
View part
Mitsubishi Triton ML 2.4L 4G64 16V EFI 2WD 2006-Current Manifold
MPI AutomotiveRRP$1295.76Mitsubishi Triton ML 2.4L 4G64 16V EFI 2WD 2006-Current Manifold Replacement Includes Cat Direct Fit.
View part
Mitsubishi NM, NJ, NP Pajero V6 3.5L - 3.8L May 2000 on, Cat
MPI AutomotiveRRP$1105.08Mitsubishi NM, NJ, NP Pajero V6 3.5L - 3.8L May 2000 on, Cat on Passenger Side Extractor 6G74.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.