Mitsubishi Pajero Extractors - NP NS NW V6 3.8L 6G75 Sept 2006
MPI AutomotiveRRP$1752.34Mitsubishi Pajero Extractors - NP NS NW V6 3.8L 6G75 Sept 2006 on - includes catalytic converters (SKU.
View partFX-458
Mitsubishi L300 SF, SH, SG, SJ 2.0L & 2.4L 16V EFI 94 - 05 4G64 Equal Spaced Oval Port
Mitsubishi L300 SF, SH, SG, SJ 2.0L & 2.4L 16V EFI 94 - 05 4G64 Equal Spaced Oval Port Direct Fit (SKU.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $673.89 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- FX-458
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Mitsubishi
- Stock status
- In stock at supplier
The MPI Automotive FX-458 is a direct-fit part from the extractors range, listed to fit the Mitsubishi L300 (SF/SH/SG/SJ) 2.0L and 2.4L 16V EFI, 1994 to 2005, with the equal-spaced oval-port head. It's the head-end component for those L300 vans.
What is this part and where does it sit?
This is a direct-fit head-end exhaust part from MPI's extractors range, sized for the L300's 4G64-family engine. A part of this type bolts to the cylinder head where the factory manifold lives and feeds into the exhaust pipework behind it, so it's the very first stage of the system. The listing's 'equal-spaced oval-port' note describes the head it's matched to — that port spacing and shape are what decide whether it bolts up, which is why the listing calls it out so specifically.
What does the FX-458 cover?
The FX-458 is the direct-fit head-end part only, not a full exhaust system. The supplier hasn't published the construction specifics — tube diameter, material and finish aren't stated in this listing — so we don't put numbers on it that the record doesn't carry. What the listing does pin down is the engine family and the oval-port head, which is the part that matters most for fit. We'd confirm the remaining detail with MPI Automotive at order time.
Will it suit my L300?
It's listed to fit the SF/SH/SG/SJ L300 with the 2.0L or 2.4L 16V EFI and the equal-spaced oval-port head, 1994 to 2005. That's a long run across several van series, and the oval-port detail means the head has to match, so confirm your engine and head with us before ordering. Fitment here is listed-to-fit, not guaranteed, because feed data can be imperfect.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits L300 head-end parts in-house across the Illawarra. The job means unbolting the factory unit from the head, sealing the new part with fresh gaskets and confirming it ties cleanly into the existing pipework. Send us your L300's engine and series and we'll verify the FX-458 before booking the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Which L300 does the FX-458 suit?
- It's listed for the SF/SH/SG/SJ L300 with the 2.0L or 2.4L 16V EFI and equal-spaced oval-port head, 1994 to 2005. Confirm your engine and head type with the workshop.
- Is this a complete exhaust?
- No. It's the direct-fit head-end part. The pipework and muffler behind it are separate.
- What's published about the construction?
- The supplier hasn't published tube diameter or material in this listing. We can confirm those with MPI Automotive when you order through us.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Mitsubishi MK Triton V6 3.0LR SOHC 24V 6G72 4WD/2WD 1996 - SEPT 2004
MPI AutomotiveRRP$1525.22Mitsubishi MK Triton V6 3.0LR SOHC 24V 6G72 4WD/2WD 1996 - SEPT 2004 includes Y Pipe, Flex Extractor.
View part
Mitsubishi Magna TR, TS 3.0L V6 Single Cam including Flex & Y-pipe EARLY
MPI AutomotiveRRP$1459.21Mitsubishi Magna TR, TS 3.0L V6 Single Cam including Flex & Y-pipe EARLY Model Extractor.
View part
Mitsubishi Lancer CJ 2.0L, 2.4L Engine 4B11, 4B12, 2008 Onwards
MPI AutomotiveRRP$1303.45Mitsubishi Lancer CJ 2.0L, 2.4L Engine 4B11, 4B12, 2008 Onwards Extractor (FX-422) Fits MITSUBISHI.
View part
Mitsubishi Triton ML 2.4L 4G64 16V EFI 2WD 2006-Current Manifold
MPI AutomotiveRRP$1295.76Mitsubishi Triton ML 2.4L 4G64 16V EFI 2WD 2006-Current Manifold Replacement Includes Cat Direct Fit.
View part
Mitsubishi NM, NJ, NP Pajero V6 3.5L - 3.8L May 2000 on, Cat
MPI AutomotiveRRP$1105.08Mitsubishi NM, NJ, NP Pajero V6 3.5L - 3.8L May 2000 on, Cat on Passenger Side Extractor 6G74.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.