Mitsubishi Pajero Extractors - NP NS NW V6 3.8L 6G75 Sept 2006
MPI AutomotiveRRP$1752.34Mitsubishi Pajero Extractors - NP NS NW V6 3.8L 6G75 Sept 2006 on - includes catalytic converters (SKU.
View partFX-468A
Mitsubishi Pajero NK, NJ, NL 6G74,3.5 V6 96-2000 (Automatic) Extractor
Mitsubishi Pajero NK, NJ, NL 6G74,3.5 V6 96-2000 (Automatic) Extractor (FX-468A) Fits MITSUBISHI. Fast.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $812.86 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- FX-468A
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Mitsubishi
- Stock status
- In stock at supplier
The MPI Automotive FX-468A is a set of replacement extractors listed to fit the Mitsubishi Pajero (NK/NJ/NL) with the 3.5-litre 6G74 V6 and automatic transmission, up to 2000. It swaps the factory exhaust manifold for a tubular extractor design at the head.
What are extractors and what do they change?
Extractors, sometimes called headers, replace the cast exhaust manifold that bolts to the cylinder head. Instead of dumping each cylinder's exhaust into a single shared casting, an extractor gives each port its own tube before they merge, which is meant to reduce the back-pressure the engine works against as it pushes spent gas out. They sit at the very front of the exhaust system, ahead of everything else. On a V6 like the Pajero's 6G74 that means a tubular set per bank. They're a breathing change at the head, and the rest of the system carries on behind them.
What does this set cover?
The FX-468A is the head-end component only: the extractor tubes that replace the manifold. It's listed specifically for the automatic 6G74 Pajero in the NK, NJ and NL series up to 2000, which matters because engine and gearbox combinations change the clearances and flange layout around the manifold. Material, tube diameter and finish aren't published by the supplier in this listing, so we'd confirm those details directly with MPI Automotive when you order.
Will it suit my Pajero?
It's listed to fit the NK/NJ/NL Pajero with the 3.5 V6 6G74 and an automatic, to 2000. Pajero generations ran several engines and both manual and auto boxes, and this set is the automatic version, so the safest move is to give us your exact build, year and transmission. We'll match it against the listing before anything is ordered — feed data can be imperfect, so we treat fit as listed-to-fit, not guaranteed.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits extractor sets like this in-house across the Illawarra. Fitting extractors means unbolting the old manifold at the head and sealing the new set with fresh gaskets, then checking it ties cleanly into the existing pipework. Send your Pajero's details and we'll confirm the FX-468A is right for your variant and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Will the FX-468A fit my Pajero?
- It's listed to fit the Mitsubishi Pajero NK/NJ/NL with the 3.5 V6 6G74 and automatic transmission, up to 2000. Confirm your exact year and gearbox with the workshop before ordering.
- Does this include the rest of the exhaust?
- No. The FX-468A is the extractor set that replaces the manifold at the head only. The rest of the system behind it stays as is unless you're changing it separately.
- What material and size are the tubes?
- Those details aren't published by the supplier in this listing. We can confirm them with MPI Automotive when you order through the workshop.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Mitsubishi MK Triton V6 3.0LR SOHC 24V 6G72 4WD/2WD 1996 - SEPT 2004
MPI AutomotiveRRP$1525.22Mitsubishi MK Triton V6 3.0LR SOHC 24V 6G72 4WD/2WD 1996 - SEPT 2004 includes Y Pipe, Flex Extractor.
View part
Mitsubishi Magna TR, TS 3.0L V6 Single Cam including Flex & Y-pipe EARLY
MPI AutomotiveRRP$1459.21Mitsubishi Magna TR, TS 3.0L V6 Single Cam including Flex & Y-pipe EARLY Model Extractor.
View part
Mitsubishi Lancer CJ 2.0L, 2.4L Engine 4B11, 4B12, 2008 Onwards
MPI AutomotiveRRP$1303.45Mitsubishi Lancer CJ 2.0L, 2.4L Engine 4B11, 4B12, 2008 Onwards Extractor (FX-422) Fits MITSUBISHI.
View part
Mitsubishi Triton ML 2.4L 4G64 16V EFI 2WD 2006-Current Manifold
MPI AutomotiveRRP$1295.76Mitsubishi Triton ML 2.4L 4G64 16V EFI 2WD 2006-Current Manifold Replacement Includes Cat Direct Fit.
View part
Mitsubishi NM, NJ, NP Pajero V6 3.5L - 3.8L May 2000 on, Cat
MPI AutomotiveRRP$1105.08Mitsubishi NM, NJ, NP Pajero V6 3.5L - 3.8L May 2000 on, Cat on Passenger Side Extractor 6G74.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.