Mitsubishi Pajero Extractors - NP NS NW V6 3.8L 6G75 Sept 2006
MPI AutomotiveRRP$1752.34Mitsubishi Pajero Extractors - NP NS NW V6 3.8L 6G75 Sept 2006 on - includes catalytic converters (SKU.
View partFX-470
Mitsubishi Pajero EiO 2.0L 2000 on Extractor
Mitsubishi Pajero EiO 2.0L 2000 on Extractor (SKU: FX-470) Engineered. Quality guaranteed.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $549.51 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- FX-470
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Mitsubishi
- Stock status
- In stock at supplier
The MPI Automotive FX-470 is a set of extractors listed to fit the Mitsubishi Pajero iO with the 2.0L engine (2000 on). Extractors replace the factory cast manifold, so this is a front-of-system part for the compact Pajero.
What does this set of extractors cover?
The FX-470 is the extractor stage for the Pajero iO's 2.0L engine — tubular headers that bolt to the cylinder head in place of the original cast manifold. They cover the run from the head flange to where the rest of the exhaust joins; any cat, pipework or muffler behind them are separate parts. This listing supplies the headers on their own.
What are extractors and what do they change?
Extractors give each cylinder its own primary pipe before the pipes merge, instead of the short shared passages of a cast manifold. On a small-capacity engine like the iO's 2.0L the aim is freer breathing out of the head. The honest trade-offs: tubular headers change the exhaust note, they sit in a tight engine bay so clearance matters, and original shields or sensor bungs may need carrying across. We publish no power or sound figures for the FX-470 — those depend on the rest of the system and the tune.
Will it suit my Mitsubishi Pajero?
The FX-470 is listed to fit the Pajero iO 2.0L from 2000 on; treat that as a starting point, not a guarantee, because catalogue feed data can be imperfect. The iO is the compact Pajero, distinct from the full-size models, so confirm you have the right variant and engine with the workshop before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits extractors like the FX-470 in-house across the Illawarra. It is head-end labour: freeing the existing manifold, transferring sensors and shields, and checking clearance and gasket seal before the rest of the system goes back on. It carries a recommended retail price of $549.51, supplied by MPI Automotive; if it is not on the shelf we order it in.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Will the FX-470 fit my Pajero iO?
- It's listed to fit the Pajero iO 2.0L from 2000 on. The iO is the compact model, so confirm you have the right variant and engine with the workshop first.
- Is a catalytic converter included?
- No — the FX-470 is the extractor stage only. Any cat, pipework or muffler behind it is a separate part.
- Can the workshop fit it?
- Yes. We supply and fit the FX-470 in-house in the Illawarra and check clearance and gasket seal as part of the job.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Mitsubishi MK Triton V6 3.0LR SOHC 24V 6G72 4WD/2WD 1996 - SEPT 2004
MPI AutomotiveRRP$1525.22Mitsubishi MK Triton V6 3.0LR SOHC 24V 6G72 4WD/2WD 1996 - SEPT 2004 includes Y Pipe, Flex Extractor.
View part
Mitsubishi Magna TR, TS 3.0L V6 Single Cam including Flex & Y-pipe EARLY
MPI AutomotiveRRP$1459.21Mitsubishi Magna TR, TS 3.0L V6 Single Cam including Flex & Y-pipe EARLY Model Extractor.
View part
Mitsubishi Lancer CJ 2.0L, 2.4L Engine 4B11, 4B12, 2008 Onwards
MPI AutomotiveRRP$1303.45Mitsubishi Lancer CJ 2.0L, 2.4L Engine 4B11, 4B12, 2008 Onwards Extractor (FX-422) Fits MITSUBISHI.
View part
Mitsubishi Triton ML 2.4L 4G64 16V EFI 2WD 2006-Current Manifold
MPI AutomotiveRRP$1295.76Mitsubishi Triton ML 2.4L 4G64 16V EFI 2WD 2006-Current Manifold Replacement Includes Cat Direct Fit.
View part
Mitsubishi NM, NJ, NP Pajero V6 3.5L - 3.8L May 2000 on, Cat
MPI AutomotiveRRP$1105.08Mitsubishi NM, NJ, NP Pajero V6 3.5L - 3.8L May 2000 on, Cat on Passenger Side Extractor 6G74.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.