Mitsubishi Pajero Extractors - NP NS NW V6 3.8L 6G75 Sept 2006
MPI AutomotiveRRP$1752.34Mitsubishi Pajero Extractors - NP NS NW V6 3.8L 6G75 Sept 2006 on - includes catalytic converters (SKU.
View partFX-471
Mitsubishi Canter 449E 3.9L - 4.2L Diesel 4D34 91 - 95 Extractor
Mitsubishi Canter 449E 3.9L - 4.2L Diesel 4D34 91 - 95 Extractor (SKU: FX-471) Engineered. Quality guaranteed.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $721.82 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- FX-471
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Mitsubishi
- Stock status
- In stock at supplier
The MPI Automotive FX-471 is a set of extractors listed to fit the Mitsubishi Canter 449E (1991–1995) with the 3.9L and 4.2L 4D34 diesel engine. Extractors replace the factory cast manifold, so this is a front-of-system part for the light truck.
What does this set of extractors cover?
The FX-471 is the extractor stage for the Canter 449E's 4D34 diesel — tubular headers that bolt to the cylinder head in place of the original cast manifold. They cover the run from the head flange to where the rest of the exhaust joins; any pipework, converter or muffler behind them are separate parts. As a four-cylinder diesel it's a single inline header set.
What are extractors and what do they change?
Extractors give each cylinder its own primary pipe before the pipes merge, rather than the short shared passages of a cast manifold. On a working diesel like the 4D34 the aim is freer breathing out of the head, and on a commercial truck replacing a cracked or tired cast manifold is often the practical driver too. The honest trade-offs: tubular headers change the exhaust note, clearance matters around the chassis, and original shields or sensor bungs may need carrying across. We publish no power or sound figures for the FX-471.
Will it suit my Mitsubishi Canter?
The FX-471 is listed to fit the Canter 449E (1991–1995) with the 3.9L and 4.2L 4D34 diesel; treat that as a starting point, not a guarantee, because catalogue feed data can be imperfect. Cab and chassis variants differ across the Canter range, so confirm your exact build with the workshop before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits extractors like the FX-471 in-house across the Illawarra. It is head-end labour: freeing the existing manifold, transferring shields and any sensors, and checking clearance and gasket seal before the rest of the system goes back on. It carries a recommended retail price of $721.82, supplied by MPI Automotive; if it is not on the shelf we order it in.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Which Canter does the FX-471 suit?
- It's listed for the Canter 449E (1991–1995) with the 3.9L and 4.2L 4D34 diesel. Cab and chassis variants differ, so confirm your build with the workshop first.
- Is this a diesel part?
- Yes — it's listed for the 4D34 diesel engine in the 449E Canter.
- Is pipework included?
- No — the FX-471 is the extractor stage only. Pipes, converter and muffler behind it are separate parts.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Mitsubishi MK Triton V6 3.0LR SOHC 24V 6G72 4WD/2WD 1996 - SEPT 2004
MPI AutomotiveRRP$1525.22Mitsubishi MK Triton V6 3.0LR SOHC 24V 6G72 4WD/2WD 1996 - SEPT 2004 includes Y Pipe, Flex Extractor.
View part
Mitsubishi Magna TR, TS 3.0L V6 Single Cam including Flex & Y-pipe EARLY
MPI AutomotiveRRP$1459.21Mitsubishi Magna TR, TS 3.0L V6 Single Cam including Flex & Y-pipe EARLY Model Extractor.
View part
Mitsubishi Lancer CJ 2.0L, 2.4L Engine 4B11, 4B12, 2008 Onwards
MPI AutomotiveRRP$1303.45Mitsubishi Lancer CJ 2.0L, 2.4L Engine 4B11, 4B12, 2008 Onwards Extractor (FX-422) Fits MITSUBISHI.
View part
Mitsubishi Triton ML 2.4L 4G64 16V EFI 2WD 2006-Current Manifold
MPI AutomotiveRRP$1295.76Mitsubishi Triton ML 2.4L 4G64 16V EFI 2WD 2006-Current Manifold Replacement Includes Cat Direct Fit.
View part
Mitsubishi NM, NJ, NP Pajero V6 3.5L - 3.8L May 2000 on, Cat
MPI AutomotiveRRP$1105.08Mitsubishi NM, NJ, NP Pajero V6 3.5L - 3.8L May 2000 on, Cat on Passenger Side Extractor 6G74.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.