Mitsubishi Pajero Extractors - NP NS NW V6 3.8L 6G75 Sept 2006
MPI AutomotiveRRP$1752.34Mitsubishi Pajero Extractors - NP NS NW V6 3.8L 6G75 Sept 2006 on - includes catalytic converters (SKU.
View partFX-478DFM
Mitsubishi Challenger V6 4WD Direct Fit (Manual only) Extractor
MPI Automotive Mitsubishi Challenger V6 4WD Direct Fit (Manual only) Extractor.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $964.80 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- FX-478DFM
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Mitsubishi
- Stock status
- In stock at supplier
The MPI Automotive FX-478DFM is a direct-fit set of extractors listed to fit the Mitsubishi Challenger V6 4WD, for manual-transmission cars only. Extractors replace the factory cast manifolds, so this is a front-of-system part.
What does this set of extractors cover?
The FX-478DFM is the extractor stage for the Challenger's V6 — tubular headers that bolt to the heads in place of the cast manifolds. They cover the run from the head flanges to where the rest of the exhaust joins; the cats, pipework and mufflers behind them are separate parts. The 'DFM' designation marks it as a direct-fit, manual-only set.
What are extractors and what do they change?
Extractors give each cylinder its own primary pipe before merging at the collector, rather than the short shared passages of a cast manifold. On the Challenger V6 the aim is freer breathing out of the heads. The manual-only note is important: the routing suits the manual-transmission cars, and the auto cars are a different fitment. The honest trade-offs: tubular headers change the exhaust note, clearance is tight in a 4WD bay, and sensors and shields usually need carrying across. We publish no power or sound figures for the FX-478DFM.
Will it suit my Mitsubishi Challenger?
The FX-478DFM is listed to fit the V6 4WD Challenger with a manual transmission; treat that as a starting point, not a guarantee, because catalogue feed data can be imperfect. The manual-only requirement is the key check here, so confirm your transmission and exact build with the workshop before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits extractors like the FX-478DFM in-house across the Illawarra. It is head-end labour on a tight 4WD V6 bay: freeing the original manifolds, transferring sensors and shields, and checking clearance and gasket seal at both heads. It carries a recommended retail price of $964.80, supplied by MPI Automotive; if it is not on the shelf we order it in.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Does the FX-478DFM fit automatic Challengers?
- No — it's listed as a manual-only direct-fit set. Automatic cars take a different fitment, so confirm your transmission with the workshop first.
- Will it suit my Challenger?
- It's listed for the V6 4WD Challenger with a manual transmission. Catalogue data can vary by build, so confirm your variant with the workshop.
- Are the cats included?
- No — the FX-478DFM is the extractor stage only. The cats, pipework and mufflers behind it are separate parts.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Mitsubishi MK Triton V6 3.0LR SOHC 24V 6G72 4WD/2WD 1996 - SEPT 2004
MPI AutomotiveRRP$1525.22Mitsubishi MK Triton V6 3.0LR SOHC 24V 6G72 4WD/2WD 1996 - SEPT 2004 includes Y Pipe, Flex Extractor.
View part
Mitsubishi Magna TR, TS 3.0L V6 Single Cam including Flex & Y-pipe EARLY
MPI AutomotiveRRP$1459.21Mitsubishi Magna TR, TS 3.0L V6 Single Cam including Flex & Y-pipe EARLY Model Extractor.
View part
Mitsubishi Lancer CJ 2.0L, 2.4L Engine 4B11, 4B12, 2008 Onwards
MPI AutomotiveRRP$1303.45Mitsubishi Lancer CJ 2.0L, 2.4L Engine 4B11, 4B12, 2008 Onwards Extractor (FX-422) Fits MITSUBISHI.
View part
Mitsubishi Triton ML 2.4L 4G64 16V EFI 2WD 2006-Current Manifold
MPI AutomotiveRRP$1295.76Mitsubishi Triton ML 2.4L 4G64 16V EFI 2WD 2006-Current Manifold Replacement Includes Cat Direct Fit.
View part
Mitsubishi NM, NJ, NP Pajero V6 3.5L - 3.8L May 2000 on, Cat
MPI AutomotiveRRP$1105.08Mitsubishi NM, NJ, NP Pajero V6 3.5L - 3.8L May 2000 on, Cat on Passenger Side Extractor 6G74.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.