Mitsubishi Pajero Extractors - NP NS NW V6 3.8L 6G75 Sept 2006
MPI AutomotiveRRP$1752.34Mitsubishi Pajero Extractors - NP NS NW V6 3.8L 6G75 Sept 2006 on - includes catalytic converters (SKU.
View partFX-482LHS
Mitsubishi Pajero NM NP 3.5L OHC 24V V6 6G74 Engine 2000 on Pass Side Stainless Manifold
Mitsubishi Pajero NM NP 3.5L OHC 24V V6 6G74 Engine 2000 on Pass Side Stainless Manifold Replacement.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $535.69 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- FX-482LHS
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Mitsubishi
- Stock status
- In stock at supplier
The MPI Automotive FX-482LHS is a 304 stainless steel tubular exhaust manifold listed to fit the Mitsubishi 3.5L (2000). It replaces the cast factory manifold at the very front of the exhaust, where the gases leave the head.
What does this manifold cover?
This is a tubular manifold for the Mitsubishi, bolting directly to the cylinder head in place of the original cast iron manifold. It covers only that head-end stage, feeding into whatever pipework, cats and mufflers sit behind it. The FX-482LHS is supplied as the manifold itself; downstream components are not part of this listing.
What is a tubular manifold and why fit one?
A tubular manifold is a fabricated replacement for the cast exhaust manifold, using separate pipes from each port rather than one solid casting. These are often chosen when an original has cracked, warped or rusted out and a like-for-like casting is hard to source. Building it in 304 stainless steel is aimed at resisting the heat-cycling and corrosion that kill the originals. The trade-offs are clearance in a tight bay, carrying over sensor bungs and heat shields, and a slight shift in note versus the cast part. We hold no power or sound data for the FX-482LHS.
Will it suit my Mitsubishi?
The FX-482LHS is listed to fit the Mitsubishi 3.5L (2000); treat that as a starting point, not a guarantee, because catalogue feed data can be imperfect. The listing covers the 2000 range. It is listed against the Mitsubishi 3.5L engine rather than one model name, so confirm the exact build with the workshop before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits tubular manifolds like the FX-482LHS in-house across the Illawarra. It is head-end labour: freeing the existing manifold, transferring sensors and shields, and checking clearance and gasket seal before the rest of the system goes back on. It carries a recommended retail price of $535.69, supplied by MPI Automotive; if it is not on the shelf we order it in.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Will the FX-482LHS fit my Mitsubishi?
- It's listed to fit the Mitsubishi 3.5L (2000). Catalogue data can vary by engine and build, so confirm your exact variant with the workshop before ordering.
- Is this a direct replacement for the original manifold?
- It's a tubular manifold listed as a replacement for the factory cast unit on the Mitsubishi. We confirm the head match and sensor positions for your build before fitting.
- What's it made from?
- The FX-482LHS is 304 stainless steel. We don't publish weights, power or sound figures for it.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Mitsubishi MK Triton V6 3.0LR SOHC 24V 6G72 4WD/2WD 1996 - SEPT 2004
MPI AutomotiveRRP$1525.22Mitsubishi MK Triton V6 3.0LR SOHC 24V 6G72 4WD/2WD 1996 - SEPT 2004 includes Y Pipe, Flex Extractor.
View part
Mitsubishi Magna TR, TS 3.0L V6 Single Cam including Flex & Y-pipe EARLY
MPI AutomotiveRRP$1459.21Mitsubishi Magna TR, TS 3.0L V6 Single Cam including Flex & Y-pipe EARLY Model Extractor.
View part
Mitsubishi Lancer CJ 2.0L, 2.4L Engine 4B11, 4B12, 2008 Onwards
MPI AutomotiveRRP$1303.45Mitsubishi Lancer CJ 2.0L, 2.4L Engine 4B11, 4B12, 2008 Onwards Extractor (FX-422) Fits MITSUBISHI.
View part
Mitsubishi Triton ML 2.4L 4G64 16V EFI 2WD 2006-Current Manifold
MPI AutomotiveRRP$1295.76Mitsubishi Triton ML 2.4L 4G64 16V EFI 2WD 2006-Current Manifold Replacement Includes Cat Direct Fit.
View part
Mitsubishi NM, NJ, NP Pajero V6 3.5L - 3.8L May 2000 on, Cat
MPI AutomotiveRRP$1105.08Mitsubishi NM, NJ, NP Pajero V6 3.5L - 3.8L May 2000 on, Cat on Passenger Side Extractor 6G74.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.