Mitsubishi Pajero Extractors - NP NS NW V6 3.8L 6G75 Sept 2006
MPI AutomotiveRRP$1752.34Mitsubishi Pajero Extractors - NP NS NW V6 3.8L 6G75 Sept 2006 on - includes catalytic converters (SKU.
View partFX-483RHS
Mitsubishi Pajero NP, NS 3.8L 24V V6 6G74 2002 on Drivers Side S Manifold Replacement
MPI Automotive Mitsubishi Pajero NP, NS 3.8L 24V V6 6G74 2002 on Drivers Side S/S Manifold Replacement With EGR.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $535.69 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- FX-483RHS
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Mitsubishi
- Stock status
- In stock at supplier
The MPI Automotive FX-483RHS is the driver's-side stainless manifold replacement listed to fit the Mitsubishi Pajero NP/NS 3.8L 24V V6 (6G74) from 2002 on, retaining the EGR provision. It is a side-specific casting, so it replaces only the right-hand bank manifold rather than a full system.
What is a replacement manifold and where does it sit?
On a V6 like the Pajero's 6G74, each cylinder bank runs its own exhaust manifold that collects gases from three ports and feeds them into the down-pipe. This FX-483RHS is the driver's-side (right-hand) unit, built in stainless to handle the heat where the original cast manifold can crack or warp with age. It keeps the EGR take-off the engine relies on, so the emissions plumbing the Pajero left the factory with stays in place. It is a direct replacement part, not a tuned extractor set or a free-flowing aftermarket header.
Will it suit my Mitsubishi Pajero?
It is listed to fit the Mitsubishi Pajero NP and NS series with the 3.8L 24V V6 (6G74) from 2002 onward, on the driver's side only with EGR. Because manifolds are side-specific and the EGR arrangement matters, confirm your exact build, body code and engine with the workshop before ordering so the correct hand is supplied.
Is it road relevant?
This manifold keeps the EGR provision rather than deleting emissions hardware, so it is a like-for-like replacement of the original casting. Road compliance still depends on your vehicle and how it is presented; confirm the requirements for your registration with the workshop before fitting.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits replacement manifolds like this in-house across the Illawarra. Manifold swaps on a V6 mean clearing the bank, freeing seized studs and refreshing gaskets, so it is bay work rather than a driveway job. Send your Pajero's details and we will confirm the side and EGR fit, quote the labour, and book it in. The RRP for this part is $535.69.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is the FX-483RHS the left or right manifold?
- It is the driver's-side (right-hand) manifold replacement for the Pajero NP/NS 3.8L V6. The passenger side is a separate part number.
- Does it keep the EGR?
- Yes. The FX-483RHS retains the EGR provision, so it replaces the original manifold without removing that emissions take-off.
- Can the workshop confirm it fits my Pajero?
- Yes. Give Oak Flats Muffler Men your series and engine and we will confirm the correct side and EGR fitment before ordering.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Mitsubishi MK Triton V6 3.0LR SOHC 24V 6G72 4WD/2WD 1996 - SEPT 2004
MPI AutomotiveRRP$1525.22Mitsubishi MK Triton V6 3.0LR SOHC 24V 6G72 4WD/2WD 1996 - SEPT 2004 includes Y Pipe, Flex Extractor.
View part
Mitsubishi Magna TR, TS 3.0L V6 Single Cam including Flex & Y-pipe EARLY
MPI AutomotiveRRP$1459.21Mitsubishi Magna TR, TS 3.0L V6 Single Cam including Flex & Y-pipe EARLY Model Extractor.
View part
Mitsubishi Lancer CJ 2.0L, 2.4L Engine 4B11, 4B12, 2008 Onwards
MPI AutomotiveRRP$1303.45Mitsubishi Lancer CJ 2.0L, 2.4L Engine 4B11, 4B12, 2008 Onwards Extractor (FX-422) Fits MITSUBISHI.
View part
Mitsubishi Triton ML 2.4L 4G64 16V EFI 2WD 2006-Current Manifold
MPI AutomotiveRRP$1295.76Mitsubishi Triton ML 2.4L 4G64 16V EFI 2WD 2006-Current Manifold Replacement Includes Cat Direct Fit.
View part
Mitsubishi NM, NJ, NP Pajero V6 3.5L - 3.8L May 2000 on, Cat
MPI AutomotiveRRP$1105.08Mitsubishi NM, NJ, NP Pajero V6 3.5L - 3.8L May 2000 on, Cat on Passenger Side Extractor 6G74.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.