K-RPM15792

Redback 2.5" Catback Exhaust with Hotdog Centre and Dual Outlet Rear Muffler for Ford

Redback 2.5" Catback Exhaust with Hotdog Centre and Dual Outlet Rear Muffler.

BrandRedbackRedback Exhausts

Category: Mufflers and resonators

RRP $573.03 AUD
In stock at supplier
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
Redback 2.5" Catback Exhaust with Hotdog Centre and Dual Outlet Rear Muffler for Ford Falcon FG XR6 G6E Sedan(02/2008 - 12/2014) product image

Part specs

SKU
K-RPM15792
Supplier
Redback Exhausts
Category
Mufflers and resonators
Vehicle fitment
ford
Stock status
In stock at supplier

The Redback K-RPM15792 finishes through a dual-outlet rear muffler behind a hotdog centre — a 2.5in cat-back listed to fit the Ford Falcon FG XR6 / G6E Sedan from 02/2008 to 12/2014. The twin-outlet rear box is the standout, giving the FG a paired exit while a hotdog handles the centre.

What does the dual-outlet rear muffler do?

Rather than a single tailpipe, the K-RPM15792 ends in a rear muffler with two outlets, so the FG exits through a paired tip. The muffler still controls volume, while a hotdog resonator sits in the centre to tackle drone. The result is a tidy twin-exit 2.5in cat-back rather than a loud delete. The 2.5in sizing suits the XR6 and G6E six.

What does the cat-back replace?

A cat-back runs from the catalytic converter back to the tailpipe. On the FG sedan that's the 2.5in centre and rear pipework — here the hotdog centre and dual-outlet rear muffler — while the factory cat stays in place. The emissions hardware is left as Ford fitted it.

Will it suit my FG XR6 / G6E Sedan?

It's listed to fit the Ford Falcon FG XR6 and G6E Sedan from 02/2008 to 12/2014. The dual-outlet routing is shaped for the FG sedan, so send your exact build to the workshop and we'll confirm the centre and rear sections before ordering.

What does fitting involve at our Illawarra workshop?

Oak Flats Muffler Men supplies and fits the K-RPM15792 in-house across the Illawarra. We align the cat-back joint, set the hotdog centre and dual-outlet rear muffler, fit the hangers and check both outlets sit even and clear of the rear bumper.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Does the K-RPM15792 have a twin exit?
Yes. It ends in a dual-outlet rear muffler, so the FG exits through a paired tip, with a hotdog centre managing drone.
Does it keep the catalytic converter?
Yes. It's a cat-back, so the factory cat stays and only the section behind it is replaced.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.