KBD9210-XXMX

Mitsubishi Pajero Sport QE 2.4L Turbo Diesel (4N15) 2015 to 2019 - Single 3" (DPF Back)

Mitsubishi Pajero Sport QE 2.4L Turbo Diesel (4N15) 2015 to 2019 - Single 3" (DPF Back) Exhaust System with Centre Muffler Only.

BrandPacemaker

Category: Mufflers and resonators

RRP $1098.54 AUD
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
Mitsubishi Pajero Sport QE 2.4L Turbo Diesel (4N15) 2015 to 2019 - Single 3" (DPF Back) Exhaust System with Centre Muffler Only product image

Part specs

SKU
KBD9210-XXMX
Supplier
Pacemaker
Category
Mufflers and resonators
Vehicle fitment
Mitsubishi QE (2015-2019)
Stock status
Confirmed on order

The Pacemaker KBD9210-XXMX silences through a single centre muffler — no rear resonator — making it the centre-muffler-only 3in DPF-back for the Mitsubishi Pajero Sport QE 2.4L turbo-diesel (4N15, 2015–2019). One absorptive stage gives a slightly more open note than the twin-silencer build.

What does the centre-muffler-only layout change?

This KBD9210-XXMX runs its quieting from a single centre muffler and leaves the rear section without a resonator. The muffler does the absorption work to tame the 4N15's diesel note, but with no second silencer behind it the rear pipe is a little more open than the version that adds a rear resonator. It's the middle ground in the KBD9210 range — calmer than a straight pipe, with one fewer restriction than the twin-silenced option.

Where does a 3in DPF-back sit in the system?

A DPF-back replaces the exhaust from the diesel particulate filter back to the tailpipe, sitting behind the factory DPF and leaving that hardware untouched. The single 3in pipe is sized for the Pajero Sport's 2.4L turbo-diesel to keep the rear section flowing freely. Because it begins after the DPF, this system changes the back half of the exhaust only — it doesn't alter the filter or the front emissions equipment.

Does it fit the QE 2.4L 4N15?

It's listed to fit the Mitsubishi Pajero Sport QE with the 2.4L 4N15 turbo-diesel from 2015 to 2019. That model ran across several years with running changes, so confirm your exact variant and rear hanger setup with the workshop before ordering rather than relying on the listing alone.

How do we fit it in the Illawarra?

Oak Flats Muffler Men supplies and installs this Pacemaker DPF-back in-house. We check the centre-muffler position, the connection behind the DPF and the rear clearances on your QE before booking it in. RRP is $1098.54 — send your build and we'll confirm the fit and slot you a bay.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

What's the difference between this and the resonator versions?
The KBD9210-XXMX uses a centre muffler only, with no rear resonator. That gives a slightly more open note than the twin-silenced build, while still quieting the diesel bark.
Is the DPF removed with this system?
No. It's a DPF-back, so it replaces the exhaust behind the factory diesel particulate filter and keeps the DPF in place.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.