Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7707.93Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View partMKFD0049
Ford Falcon AU LIVE AXLE V8 Sedan 3in With Extractors Muffler
MPI Automotive Ford Falcon AU LIVE AXLE V8 Sedan 3in With Extractors Muffler/Muffler.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $4052.20 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MKFD0049
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Ford
- Stock status
- In stock at supplier
The MPI Automotive MKFD0049 is a 3in extractor-based exhaust package listed to fit the Ford Falcon AU V8 sedan (live-axle rear). It runs single 3in piping off the extractors with twin mufflers in the run, so it's a header-back change rather than a tailpipe-only swap.
What's an extractor system and what does it change?
Extractors (tubular headers) replace the cast factory manifolds, giving each cylinder a longer, more even path into the collector instead of dumping into a shared casting. On a V8 like this Ford Falcon AU that's the front end; the MKFD0049 then carries it rearward in single 3in pipe to twin mufflers in the run. A tube-header system breathes more freely and changes the note compared with stock, but it's a bigger job than a bolt-on rear section. No power, weight or sound figures are published by the supplier, so none are quoted here.
Will it suit my Ford Falcon AU?
It's listed to fit the Ford Falcon AU V8 sedan (live-axle rear). AU is the platform code in the listing, and the rear layout matters — this is the live-axle version, which dictates how the back half routes. Treat fitment as listed-to-fit, not guaranteed: confirm the rear end and head type with the workshop before ordering the 3in package.
Is it road legal?
Extractors and the pipework behind them sit between you and registration in NSW, so road compliance comes down to the complete system and how it's set up. This listing doesn't state whether a catalytic converter is included, so we won't claim it either way. If road registration matters for your sedan, raise it with us first and we'll talk through what your build needs.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits extractor systems like the MKFD0049 in-house across the Illawarra. A header-back job means working tight around the V8, so we check clearances to the steering and chassis, set the single 3in run, and hang the mufflers on fresh mounts. It's listed at $4052.20 and is an item we confirm and order in for your Falcon — send your build and we'll book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Will the MKFD0049 fit my Ford Falcon AU?
- It's listed to fit the Ford Falcon AU V8 sedan (live-axle rear). Confirm your exact rear end and head type with the workshop before ordering.
- What size piping is this?
- It runs single 3in pipe off the extractors with twin mufflers in the run.
- Is it just a muffler swap?
- No — it's an extractor-based, header-back package, so it replaces the manifolds and the run behind them, not just the rear muffler.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7262.11MPI Automotive Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View part
Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7102.89Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0237) Engineered. Quality guaranteed.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7058.57Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0124) Engineered. Quality guaranteed.
View part
Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7030.42Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler/Muffler.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler
MPI AutomotiveRRP$7003.03MPI Automotive Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.