Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7707.93Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View partMKFD0065
Ford Falcon AU V8 IRS SDN 2.5in Dual With Extractors Tailpipe
Ford Falcon AU V8 IRS SDN 2.5in Dual With Extractors Tailpipe.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $4230.27 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MKFD0065
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Ford
- Stock status
- In stock at supplier
The MPI Automotive MKFD0065 is a 2.5in dual system with extractors and a tailpipe, listed to fit the Ford Falcon AU V8 sedan with IRS. It runs a twin 2.5in layout off the extractors out to the tailpipe.
What does this system cover?
This is a 2.5in dual system built off extractors for the AU Falcon V8 sedan with independent rear suspension. It starts at tubular extractors in place of the cast manifolds and runs a twin 2.5in layout rearward to the tailpipe. The IRS callout matters: it tells the workshop which AU rear end the system is routed around, which is why confirming your build is the right first step.
What are extractors and what does the dual layout change?
Extractors are tuned tubular headers that replace the cast manifolds, giving each cylinder its own primary tube so the V8 scavenges more freely than a shared casting allows. Running them into a dual 2.5in system carries that flow rearward on two pipes. The supplier hasn't published a muffler configuration for this listing, so we won't state one. The honest trade-offs for extractors apply: they sit lower, run hotter and take longer to fit, and the result is louder than stock.
Will it suit my AU Falcon?
It's listed to fit the Ford Falcon AU V8 IRS sedan, with three concrete fitments recorded. Because the AU came in different rear-end configurations, confirm that yours is the IRS car with the workshop before ordering; feed data can be imperfect. The MKFD0065 carries an RRP of $4,230.27.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits AU Falcon systems in-house across the Illawarra. We'll fit the extractors with proper clearance, then route the dual 2.5in run around the IRS rear end and align the tailpipe exits. Send us your AU details and we'll confirm the fit before booking the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Does the MKFD0065 suit the IRS or live-axle AU?
- This listing is for the Ford Falcon AU V8 IRS sedan. There's a separate live-axle AU system, so confirm your rear-end configuration with the workshop before ordering.
- What size is the pipework?
- It runs a 2.5in dual layout off the extractors out to the tailpipe. The supplier hasn't published a muffler configuration, which the workshop confirms with you.
- Does it include the extractors?
- Yes, the extractors are part of this package, which runs from there back as a 2.5in dual system.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7262.11MPI Automotive Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View part
Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7102.89Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0237) Engineered. Quality guaranteed.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7058.57Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0124) Engineered. Quality guaranteed.
View part
Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7030.42Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler/Muffler.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler
MPI AutomotiveRRP$7003.03MPI Automotive Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.