Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7707.93Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View partMKFD0121
Ford BF GT V8 4V Sedan 2.5in L & R With Extractors Hotdog/Muffler
Ford BF GT V8 4V Sedan 2.5in L & R With Extractors Hotdog/Muffler (MKFD0121) Fits FORD. Fast shipping.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $4906.36 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MKFD0121
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Ford
- Stock status
- In stock at supplier
Listed for the 4V GT, the MPI Automotive MKFD0121 is a 2.5in left-and-right extractor system for the Ford BF GT V8 4V Sedan, finishing through a hotdog-and-muffler rear. The 4V designation marks it as the four-valve BF GT build, routed down each side of the sedan off tubular extractors.
What sets the BF GT 4V build apart?
The MKFD0121 is listed specifically for the Ford BF GT V8 4V Sedan — the four-valve BF GT. That 4V cylinder-head context is why it's its own listing rather than sharing a general BF fitment. It uses a left-and-right 2.5in layout, running a separate pipe down each side of the sedan, with a hotdog resonator and rear muffler for a present but streetable note on the GT.
What does the extractor portion do?
Tubular extractors replace the cast manifolds with runners off each port, easing the merge at the heads. On the MKFD0121 they feed the 2.5in L-and-R pipework into a hotdog and rear muffler — a complete engine-back package matched together. We have no published flow or sound figures, so the case for it is the BF-GT-4V-specific build and its 2.5in sizing rather than a measured number.
Will it suit my BF GT?
It is listed to fit the Ford BF GT V8 4V Sedan. Confirm your exact BF GT build, the four-valve head and any prior exhaust changes with the workshop before ordering, as feed data can be imperfect.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits BF and Falcon extractor systems in-house across the Illawarra. We confirm extractor access at the heads, then route both sides of the 2.5in L-and-R run and locate the hotdog and rear muffler under the sedan. At an RRP of $4,906.36 it's a build-to-order package; send your BF GT details for fitment confirmation.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What does 4V mean on this listing?
- It marks the four-valve BF GT cylinder head. The MKFD0121 is listed for the Ford BF GT V8 4V Sedan; confirm your exact build with the workshop.
- What's the rear muffler setup?
- A hotdog resonator ahead of a rear muffler, on a 2.5in L-and-R system off the extractors.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7262.11MPI Automotive Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View part
Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7102.89Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0237) Engineered. Quality guaranteed.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7058.57Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0124) Engineered. Quality guaranteed.
View part
Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7030.42Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler/Muffler.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler
MPI AutomotiveRRP$7003.03MPI Automotive Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.