Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7707.93Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View partMKFD0185
Ford FG V8 Sedan 2.5in L & R With Extractors Hotdog/Muffler
Ford FG V8 Sedan 2.5in L & R With Extractors Hotdog/Muffler.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $4974.93 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MKFD0185
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Ford
- Stock status
- In stock at supplier
Covering the standard FG V8 sedan, the MPI Automotive MKFD0185 is a 2.5in left-and-right extractor system for the Ford FG V8 Sedan, with a hotdog-and-muffler rear. It runs a dedicated pipe down each side of the FG floor off tubular extractors, listed for the FG sedan rather than the GT-specific build.
What does this FG sedan system cover?
The MKFD0185 is listed for the Ford FG V8 Sedan — the broad FG sedan fitment. It's a 2.5in left-and-right system: rather than a single under-floor pipe, it splits into a symmetrical run down each side of the sedan, which suits the FG's twin-outlet rear. The hotdog-and-muffler arrangement gives a present note over a twin-muffler build while keeping it civil for daily driving.
What's a tubular extractor and where does it sit?
Extractors replace the factory cast manifolds with runners off each port, easing the path gas takes to merge off the heads. On the MKFD0185 those extractors feed the 2.5in L-and-R pipework, hotdog and rear muffler — a complete engine-back package rather than headers on their own. We hold no published flow or sound data, so the honest case is the matched, FG-specific build sized at 2.5in for the application.
Will it suit my FG Falcon V8 Sedan?
It is listed to fit the Ford FG V8 Sedan. Confirm your exact FG build and any prior exhaust work with the workshop before ordering, since feed data on these can be imperfect.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits FG and Falcon extractor systems in-house across the Illawarra. We confirm extractor access at the heads, then route both sides of the 2.5in L-and-R system and hang the hotdog and rear muffler under the sedan. At an RRP of $4,974.93 it's a build-to-order item; send your FG details for fitment confirmation.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is this the standard FG sedan version?
- It's listed for the Ford FG V8 Sedan, the broad FG sedan fitment rather than the GT-specific build. Confirm your exact build with the workshop.
- What's the rear arrangement?
- A hotdog resonator ahead of a rear muffler, on a 2.5in L-and-R system off the extractors.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7262.11MPI Automotive Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View part
Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7102.89Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0237) Engineered. Quality guaranteed.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7058.57Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0124) Engineered. Quality guaranteed.
View part
Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7030.42Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler/Muffler.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler
MPI AutomotiveRRP$7003.03MPI Automotive Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.