Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7707.93Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View partMKFD0193
Ford FG GT V8 Sedan 2.5in L & R With Extractors Hotdog/Muffler
Ford FG GT V8 Sedan 2.5in L & R With Extractors Hotdog/Muffler (SKU: MKFD0193) Engineered. Quality guaranteed.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $4890.86 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MKFD0193
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Ford
- Stock status
- In stock at supplier
Listed for the GT, the MPI Automotive MKFD0193 is a 2.5in left-and-right extractor system for the Ford FG GT V8 Sedan, finishing through a hotdog-and-muffler rear. The L-and-R layout runs a dedicated pipe down each side of the FG sedan floor off tubular extractors at the heads.
What makes this the FG GT sedan build?
The MKFD0193 is listed for the Ford FG GT V8 Sedan — the GT version of the FG range. It uses a left-and-right layout, splitting into a separate pipe down each side of the sedan rather than a single under-floor run, which suits the FG sedan's twin-outlet character. The rear is a hotdog-and-muffler arrangement, lifting the note over a twin-muffler build while staying streetable.
What does the extractor and L-and-R routing change?
Tubular extractors replace the cast manifolds at the heads, easing the merge off each port. From there the 2.5in L-and-R pipework runs symmetrically down both sides of the FG sedan into a hotdog resonator and rear muffler. It's a complete engine-back package — headers, dual pipework, hotdog and muffler matched together. No flow or sound figures are published, so the description is about the build and its sizing, not a measured claim.
Will it suit my FG GT?
It is listed to fit the Ford FG GT V8 Sedan. Confirm your exact FG GT build and any prior exhaust changes with the workshop before ordering, as feed data can be imperfect.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits Falcon and FG extractor systems in-house across the Illawarra. We confirm extractor access at the heads, then route both sides of the 2.5in L-and-R system and locate the hotdog and rear muffler under the sedan. At an RRP of $4,890.86 it's a build-to-order package; send your FG GT details for fitment confirmation.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is the MKFD0193 the GT-specific version?
- Yes — it's listed for the Ford FG GT V8 Sedan. Confirm your exact FG GT build with the workshop before ordering.
- What does L-and-R mean here?
- A separate left and right pipe down each side of the FG sedan floor, a symmetrical dual layout off the extractors.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7262.11MPI Automotive Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View part
Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7102.89Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0237) Engineered. Quality guaranteed.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7058.57Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0124) Engineered. Quality guaranteed.
View part
Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7030.42Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler/Muffler.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler
MPI AutomotiveRRP$7003.03MPI Automotive Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.