Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7707.93Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View partMKFD0222
Ford FG 5.4L V8 Ute 2.5in L&R With Extractors Muffler/Hotdog
Ford FG 5.4L V8 Ute 2.5in L&R With Extractors Muffler/Hotdog (MKFD0222) Fits FORD. Fast shipping.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $5094.67 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MKFD0222
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Ford
- Stock status
- In stock at supplier
The MKFD0222 is a 2.5in left-and-right extractor system listed to fit the Ford FG 5.4L V8 Ute. It runs extractors with a hotdog resonator, working the exhaust from the manifolds back.
What are extractors and what do they change?
Extractors, or headers, replace the cast factory manifolds with tubular runners off each cylinder. The MKFD0222 carries those into a 2.5in left-and-right layout, meaning a pipe runs down each side of the car. The aim is to ease the way the 5.4L V8 breathes out compared with the cast manifolds. It is a change to the exhaust side of the engine and works as part of the wider system, not a power figure in isolation.
What is a hotdog and what does it do here?
A hotdog is a small straight-through resonator, shorter than a full muffler, used to take the edge off the note without heavily silencing the system. On the MKFD0222 it sits in the run as the silencing element. The result is a freer-flowing path than a large muffler, with a note that is louder than a fully mufflered system. The 2.5in figure sets the pipe size the rest of the system mates to; material is not published by the supplier.
Will it suit my Ford FG Ute?
The MKFD0222 is listed to fit the Ford FG 5.4L V8 Ute; confirm the exact build with the workshop first. A 2.5in left-and-right extractor system is a substantial fitment, so matching it to your specific ute and its existing exhaust matters before you order.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits extractor systems like the MKFD0222 in-house across the Illawarra. The work means access to drop the factory manifolds, fresh gaskets, and matching the dual left-and-right run to the rest of the exhaust. Supplied by MPI Automotive at $5,094.67 AUD; send your car's details and we will confirm the fit and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What does the MKFD0222 fit?
- It is listed to fit the Ford FG 5.4L V8 Ute. Confirm your exact build with the workshop before ordering.
- What is the hotdog?
- It is a small straight-through resonator that softens the note without heavily silencing the system. This kit uses one in place of a full muffler.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7262.11MPI Automotive Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View part
Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7102.89Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0237) Engineered. Quality guaranteed.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7058.57Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0124) Engineered. Quality guaranteed.
View part
Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7030.42Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler/Muffler.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler
MPI AutomotiveRRP$7003.03MPI Automotive Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.