Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7707.93Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View partMKFD0272
Ford Falcon EA - EL V8 Sedan 2.5in Dual With Extractors
Ford Falcon EA - EL V8 Sedan 2.5in Dual With Extractors.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $4362.31 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MKFD0272
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Ford
- Stock status
- In stock at supplier
The MPI Automotive MKFD0272 is a 2.5in dual system with extractors, listed to fit the Ford Falcon EA-EL V8 sedan. It replaces the factory manifolds and runs a twin 2.5in layout back from there as one package.
What does this system cover?
This is a dual 2.5in system built off extractors for the EA-EL Falcon V8 sedan. It starts at tubular extractors in place of the cast manifolds and carries two 2.5in pipes rearward. The supplier hasn't published a muffler configuration or material for this listing, so we won't state one; what's confirmed is the 2.5in dual layout and the extractors at the front.
What are extractors and what does a dual layout change?
Extractors are tuned tubular headers that replace the restrictive cast manifolds the EA-EL left the factory with, giving each cylinder its own primary tube to scavenge more cleanly. Running them into a dual 2.5in system means each bank gets its own pipe most of the way back, which suits a V8. The honest trade-offs are the usual ones for extractors on a road car: they sit lower, run hotter, take longer to fit, and the note will be louder than stock.
Will it suit my EA-EL Falcon?
It's listed to fit the Ford Falcon EA-EL V8 sedan, with four concrete fitments recorded. Feed data can be imperfect, so confirm your exact year and driveline with the workshop before ordering. The MKFD0272 carries an RRP of $4,362.31.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits dual systems like this in-house across the Illawarra. On the EA-EL sedan we'll fit the extractors with clearance to the steering and crossmember, then route and hang the twin 2.5in run to the rear. Send us your build and we'll confirm the fit before booking the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Will the MKFD0272 fit my EA-EL Falcon V8?
- It's listed to fit the Ford Falcon EA-EL V8 sedan. Confirm your exact year and driveline with the workshop before ordering, as listed fitment isn't a guarantee.
- What size is the pipework?
- It runs a 2.5in dual layout off the extractors. The supplier hasn't published a muffler configuration, which the workshop confirms with you.
- Does it include the extractors?
- Yes, the extractors are part of this package, which runs from there back as a 2.5in dual system.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7262.11MPI Automotive Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View part
Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7102.89Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0237) Engineered. Quality guaranteed.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7058.57Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0124) Engineered. Quality guaranteed.
View part
Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7030.42Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler/Muffler.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler
MPI AutomotiveRRP$7003.03MPI Automotive Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.