Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7707.93Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View partMKFD0312
Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Rear Mufflers 4in
Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Rear Mufflers 4in Quad Tips.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $6534.46 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MKFD0312
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Ford
- Stock status
- In stock at supplier
The MPI Automotive MKFD0312 is a 3in full ceramic-coated extractor system listed to fit the 5.0L V8 Ford Mustang FN from 2018, running a centre hotdog and rear mufflers out to a 4in quad tip.
What's in this full 3in FN system?
This is a complete 3in run for the 5.0L V8 FN Mustang: ceramic-coated extractors at the front, a centre hotdog resonator, rear mufflers and a 4in quad tip finish. It replaces the system from the heads back rather than just swapping a tailpipe. Carrying both the hotdog and the rear mufflers gives it more silencing than the centre-delete header-only build MPI lists for the same FN range.
What's an extractor system and what does the coating add?
Extractors replace the factory cast manifolds with tubular primaries, so each cylinder gets its own path before the runners merge. The ceramic coating acts as a thermal barrier that helps keep radiated header heat down in the engine bay, while the centre hotdog is a straight-through resonator that trims drone ahead of the rear mufflers. The honest trade-offs against stock manifolds are more fitting labour and tighter clearances under the car; the coating addresses heat, not those.
Will it suit my FN Mustang?
It's listed to fit the 5.0L V8 FN Mustang from 2018. Confirm your exact build and model year with the workshop before ordering, since the listing covers the FN range rather than every variant, and the 4in quad tip exit needs to clear your rear bumper and valance.
What does fitting involve in the Illawarra?
Oak Flats Muffler Men supplies and fits these full systems on-site. We confirm the 3in routing, the centre hotdog, the rear mufflers and the 4in quad tip exit suit your car, verify the listed fitment against your build, and book the bay from there.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What does the MKFD0312 cover from the engine back?
- It's a full 3in system — ceramic-coated extractors, a centre hotdog resonator, rear mufflers and a 4in quad tip — listed to fit the 5.0L V8 FN Mustang from 2018.
- What does the centre hotdog do on this system?
- It's a straight-through resonator sitting ahead of the rear mufflers that trims drone within the system.
- Are the extractors coated?
- Yes — they're ceramic-coated to help keep header heat down in the engine bay.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog
MPI AutomotiveRRP$7262.11MPI Automotive Mustang FN 5.0L V8 2018-23 3in Full System HPC Extractor Centre Hotdog Bi-modal Muffler 4in Quad Tip.
View part
Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7102.89Ford FG 5.0L V8 Ute 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0237) Engineered. Quality guaranteed.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7058.57Ford BF GT V8 4V Sedan 3in L & R With Extractors Muffler/Muffler (SKU: SSMKFD0124) Engineered. Quality guaranteed.
View part
Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler
MPI AutomotiveRRP$7030.42Ford FG GT 5.0L V8 Sedan 3in L & R With Extractors Muffler/Muffler.
View part
Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler
MPI AutomotiveRRP$7003.03MPI Automotive Ford BF GT V8 4V Sedan 3in L & R With Extractors Hotdog/Muffler.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.