MKSZ0009

Suzuki Jimny XL 5 Door, 1.5L, 2 1/2in Extractor, Cat, Without Centre Muffler & With Rear

Suzuki Jimny XL 5 Door, 1.5L, 2 1/2in Extractor, Cat, Without Centre Muffler & With Rear Muffler.

BrandMantaMPI Automotive

Category: Extractors and headers

RRP $2830.45 AUD
In stock at supplier
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
Suzuki Jimny XL 5 Door, 1.5L, 2 1/2in Extractor, Cat, Without Centre Muffler & With Rear Muffler product image

Part specs

SKU
MKSZ0009
Supplier
MPI Automotive
Category
Extractors and headers
Vehicle fitment
Suzuki
Stock status
In stock at supplier

The MPI Automotive MKSZ0009 is a 2-1/2in extractor system with a cat, listed to fit the Suzuki Jimny XL 5-door 1.5L. It runs without a centre muffler and keeps a rear muffler.

What does this system cover?

Built for the five-door Jimny XL with the 1.5L engine, the MKSZ0009 is a 2-1/2in extractor system that includes the cat. It deletes the centre muffler and retains the rear muffler, making it a header-back package rather than a tailpipe-only change. The centre-out, rear-in layout is a familiar way to open a small exhaust while leaving a box to keep the note manageable.

What is an extractor system and what does it change?

Extractors replace the factory manifold with tuned tubular runners, and at 2-1/2in the pipe behind them is larger than stock for the little four. Retaining the cat keeps the emissions hardware in place; running without the centre muffler and leaning on the rear box shifts the tone. Expect it to be louder than the factory system, though we do not publish a measured sound figure.

Will it suit my Jimny XL?

It is listed to fit the five-door Jimny XL 1.5L. Because the five-door is the longer-wheelbase body, routing differs from the three-door, so the model match matters. Confirm your exact build with the workshop before ordering.

Is it road legal, and what does fitting involve at our Illawarra workshop?

The system keeps the cat, but registration still hinges on your state noise and emissions requirements; confirm those with the workshop. Oak Flats Muffler Men supplies and fits Jimny exhausts in the Illawarra, checking hanger placement and clearance on the five-door before handover.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

What size is the MKSZ0009?
It is a 2-1/2in extractor system with a cat, no centre muffler and a rear muffler.
How is it different from the SSMKSZ0009?
Both are listed for the same Jimny XL 5-door 1.5L with the same layout; they are separate part numbers. Confirm which suits your build with the workshop.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.