Suzuki Jimny XL 5 Door, 1.5L, 2 1/2in Full System, Extractor, Cat
MPI AutomotiveRRP$3507.46MPI Automotive Suzuki Jimny XL 5 Door, 1.5L, 2 1/2in Full System, Extractor, Cat, Centre Hotdog & Rear Muffler.
View partSSMKSZ0005
Suzuki Jimny SWB 3 Door,1.5L, 2 1/2in Full System Extractor,Cat, Without Muffler
Suzuki Jimny SWB 3 Door,1.5L, 2 1/2in Full System Extractor,Cat, Without Muffler & With Rear Muffler.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $3272.79 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- SSMKSZ0005
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Suzuki
- Stock status
- In stock at supplier
The MPI Automotive SSMKSZ0005 is a 2in full exhaust system listed to fit the Suzuki Jimny SWB 3-door 1.5L, running an extractor and cat, no centre muffler, and a rear muffler. It's the complete extractor-back package for the short-wheelbase Jimny rather than a single component.
What does this system cover?
This is a whole-of-exhaust package for the SWB 3-door Jimny. It starts at the head with an extractor, retains a catalytic converter, runs without a centre muffler, and silences at a rear muffler — the layout the record describes. As a matched kit, the 2in pipe and the rear muffler are designed to work together. The 2in figure is the pipe diameter the record states; the 1.5L is the petrol four in the current short-wheelbase Jimny. Deleting the centre muffler while keeping a rear silencer is a deliberate layout choice on a small-capacity engine. No sound or performance figures are published with it.
What does the no-centre-muffler, rear-muffler layout change?
With the centre muffler removed and only a rear muffler silencing the run, there's one less point where the exhaust note is damped. On a 1.5L four that's a measured way to free up the system without going fully muffler-less. We have no sound data, so we won't claim a specific volume or character beyond the layout the record lists.
Will it suit my Suzuki Jimny?
It's listed to fit the Suzuki Jimny SWB 3-door with the 1.5L engine. The short-wheelbase 3-door body and the 1.5L petrol are the qualifiers. Confirm your exact build with the workshop before ordering, since the listing covers the application rather than your individual vehicle. The system retains a catalytic converter, so the emissions hardware stays in place; confirm any state requirements with the workshop.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits complete systems like the SSMKSZ0005 in-house across the Illawarra. A full extractor-back kit on the Jimny means working from the head to the rear: fitting the extractor and cat, hanging the 2in pipework, and aligning the rear muffler to the compact body. Bring the Jimny in and we'll confirm the SWB 1.5L fitment and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Does the SSMKSZ0005 keep the catalytic converter?
- Yes — the system runs a cat, so the emissions hardware stays in place. Confirm any state requirements with the workshop.
- What's the muffler layout?
- It runs without a centre muffler and silences at a rear muffler, on 2in pipe, for the SWB 3-door Jimny 1.5L. The record states the layout but no sound figures.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Suzuki Jimny XL 5 Door, 1.5L, 2 1/2in Extractor, Cat, Without Centre
MPI AutomotiveRRP$3272.79MPI Automotive Suzuki Jimny XL 5 Door, 1.5L, 2 1/2in Extractor, Cat, Without Centre Muffler & With Rear Muffler.
View part
Suzuki Jimny XL 5 Door, 1.5L, 2 1/2in Full System, Extractor, Cat
MPI AutomotiveRRP$3009.70Suzuki Jimny XL 5 Door, 1.5L, 2 1/2in Full System, Extractor, Cat, Centre Hotdog & Rear Muffler (MKSZ0007).
View part
Suzuki Jimny SWB 3 Door,1.5L, 2 1/2in Full System Extractor,Cat, Without
MPI AutomotiveRRP$2922.85Suzuki Jimny SWB 3 Door,1.5L, 2 1/2in Full System Extractor,Cat, Without Muffler & With Rear Muffler.
View part
Suzuki Jimny XL 5 Door, 1.5L, 2 1/2in Extractor, Cat, Without Centre
MPI AutomotiveRRP$2830.45Suzuki Jimny XL 5 Door, 1.5L, 2 1/2in Extractor, Cat, Without Centre Muffler & With Rear Muffler.
View part
Suzuki Jimny 1.5L Petrol - Extractor & Cat Kit - Suits 3 door & 5 door
MPI AutomotiveRRP$1482.95Suzuki Jimny 1.5L Petrol - Extractor & Cat Kit - Suits 3 door & 5 door.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.