Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPH5000FA_KIT
PH 5000 Standard VN-VS 5L Auto
Pacemaker PH 5000 Standard VN-VS 5L Auto.
BrandPacemaker
Category: Extractors and headers
RRP $1284.99 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PH5000FA_KIT
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VN VP VR
- Stock status
- Confirmed on order
The Pacemaker PH5000FA_KIT is an extractor kit listed to fit the Holden VN to VS 5L automatic. It's the standard headers kit for these Commodore-era 5-litre autos, the manifold stage of an exhaust upgrade.
What are extractors and what do they change?
Extractors, or headers, replace the cast factory exhaust manifold with separate tuned-length tubes for each cylinder before they merge into a collector. On the VN to VS 5L the aim is a clearer path off the head than a one-piece casting allows, which tends to bring a fuller exhaust note with it. The PH5000FA_KIT is the standard kit for the automatic cars, so it suits the auto driveline rather than the manual. We publish no power, flow or sound figures and won't quote any.
Will it suit my Holden VN-VS 5L Auto?
It's listed to fit the Holden VN to VS 5L automatic in standard form. The auto driveline and the VN-VS engine bay layout dictate the fit, and the manual cars take a different kit, so confirm your exact model and transmission with the workshop before ordering. We check the part against your build first.
Is it road legal?
This is an extractor kit fitted at the manifold end of the system, ahead of the catalytic converter, so it can affect emissions compliance. No road-compliance approval is published by Pacemaker and we won't claim one. What a registered VN to VS needs in NSW depends on the rest of the system and state requirements, which we'll go through with you before fitting.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits Commodore extractors in the Illawarra. We confirm the kit against your 5L auto VN to VS, check it clears the steering and chassis, fit fresh gaskets and seal the joints. RRP is listed at 1284.99 AUD; fitting is quoted once we've seen the car.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is the PH5000FA_KIT for the auto or manual?
- It's listed for the Holden VN to VS 5L automatic. The manual cars take a different kit, so confirm your transmission with the workshop before ordering.
- Which Commodores does it suit?
- The Holden VN to VS with the 5-litre engine, in automatic form. Confirm your exact model with the workshop.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.