Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5382-51
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
BrandPacemaker
Category: Extractors and headers
RRP $4891.13 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5382-51
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VE VF
- Stock status
- Confirmed on order
The Pacemaker PP5382-51 pairs 1-7/8in four-into-one competition headers with a 3in sedan system, listed to fit the Holden Commodore VE-VF sedan (Jul 2006 to Oct 2017) with the Gen IV 6.0 or 6.2 LS3 V8. It's a header-back package cut for the sedan body.
What does this kit cover?
This bundles the 1-7/8in primary four-into-one headers that replace the factory manifolds with a matching 3in sedan exhaust to carry the gases rearward. The larger 3in pipe and tuned-length primaries mark it as a performance-oriented setup rather than a quiet factory replacement, and the routing is specific to the VE-VF sedan floorpan.
What is a four-into-one header and what does it change?
Headers bolt to the cylinder heads in place of the cast manifolds and form the first section of the exhaust. A four-into-one merges each bank's four primary tubes into one collector, with the tube length tuned to favour part of the rev range. The honest trade-offs are a changed exhaust note and added compliance considerations on a road car, so headers suit owners chasing a deliberate change, not a like-for-like swap.
Will it suit my Holden Commodore sedan?
It's listed to fit the Holden Commodore VE-VF sedan (Jul 2006 to Oct 2017) with the 6.0 Gen IV or 6.2 LS3 V8. That listing is feed data rather than a guarantee, so confirm your exact series, body and engine with the workshop before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits this Pacemaker package in-house in the Illawarra. Header work on the LS sedan means manifold removal, fresh gaskets and clearance checks against the 3in system, so we verify the fitment to your car and book the hoist. The listed RRP is $4891.13.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Does the PP5382-51 suit the VF as well as the VE?
- It is listed to fit the Holden Commodore VE-VF sedan from Jul 2006 to Oct 2017 with the 6.0 Gen IV or 6.2 LS3 V8. Confirm your exact build with the workshop.
- What pipe size is the system?
- The matching sedan system listed with these headers is 3in.
- Can you fit it for me?
- Yes. Oak Flats Muffler Men sells and fits Pacemaker headers in the Illawarra; send your details and we will confirm and book it in.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Wagon 1 7/8 Tuned
PacemakerRRP$4891.13Pacemaker Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Wagon 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.