Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5381-67
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
BrandPacemaker
Category: Extractors and headers
RRP $4891.13 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5381-67
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VE VF
- Stock status
- Confirmed on order
With 1¾ in primary tubing feeding a 4-into-1 merge into a 3in system, the Pacemaker PP5381-67 is the ute-bodied header-and-pipe package listed to fit the Holden VE–VF V8 ute built 2007–2017 (Gen IV 6.0 / LS3 6.2). The 1¾ in primary is the mid-range street size — it keeps gas speed up for low-down response on a heavy Gen-IV V8.
What does the 1¾ in 4-into-1 primary suit?
On a road-driven Gen-IV V8 ute, 1¾ in primaries are the size that keeps exhaust-gas velocity high through the runners, which favours throttle response and mid-range pull over peak-rpm flow. The four primaries gather in a single 4-into-1 collector and step out into the 3in ute system, replacing the restrictive cast factory manifolds with mandrel-bent tube. It's the engine-back front half tuned for how a VE–VF ute actually gets driven.
Why a ute-specific routing?
This package is built around the ute body, so the 3in pipework is routed and hung for the tray-back floorpan and the ute's rear clearance rather than a sedan or wagon tail. Pacemaker lists it for the 2007–2017 VE–VF V8 ute; the body-specific path is what lets it clear the chassis and mounts without fouling.
Will it suit my Holden ute?
It's listed to fit the Holden VE–VF V8 ute (2007–2017, Gen IV 6.0 / LS3 6.2). We treat that as listed-to-fit and confirm it against your exact build — engine, year and the ute's underbody — before ordering, since feed data can be imperfect. Bring the VIN and we'll check it.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits Pacemaker header packages like this across the Illawarra. We match the listing to your ute, pull the cast manifolds, fit the 1¾ in primaries up to the 4-into-1 collectors, and run the 3in ute pipework on fresh gaskets. RRP is listed at 4891.13 AUD; fitting is quoted once the ute is on the hoist.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is the PP5381-67 built for the ute body specifically?
- Yes — it's the ute-bodied package, with the 3in system routed for the VE–VF ute floorpan. Sedan and wagon use different rear pipework.
- What does the 1¾ in primary size give me?
- Primaries at 1¾ in keep gas speed up for low-down and mid-range response on a street Gen-IV V8, rather than chasing top-end peak flow.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Wagon 1 7/8 Tuned
PacemakerRRP$4891.13Pacemaker Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Wagon 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.