Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5381-66
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
BrandPacemaker
Category: Extractors and headers
RRP $4891.13 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5381-66
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden WM
- Stock status
- Confirmed on order
The Pacemaker PP5381-66 is the long-wheelbase entry in this range — listed to the Holden Statesman WM-WN, Series I and Series II, with the 6.0/6.2 V8. It runs 1¾in primary 4-into-1 headers, a 4in collector and a 3in system.
Why a Statesman-specific system?
The WM-WN Statesman is the long-wheelbase car, so its underbody and floor span are longer than the Commodore sedan. Pacemaker lists the PP5381-66 to that body specifically, covering Series I and Series II, so the 3in system is routed for the longer Statesman floor rather than adapted from a shorter car. That body-specific fitment is the reason for the dedicated part number.
What's in the package?
It pairs 1¾in primary 4-into-1 headers with a 4in collector, then a 3in system to suit the Statesman. The 1¾in primary keeps gas speed up per runner for street response before the four runners merge in one stage at the collector. Pacemaker doesn't publish a material grade for this listing, so we won't state one.
Will it suit my WM or WN Statesman?
It's listed to fit the Holden Statesman WM-WN from 2006 (the August 2006 to October 2017 window in the title), Series I and Series II, fitted with the 6.0 or 6.2 V8. Feed data can lag a real car, so we confirm your exact Statesman and engine against the listing first.
What does fitting involve in the Illawarra?
Oak Flats Muffler Men fits these Pacemaker header-and-system packages on-site. On the long-wheelbase Statesman we fit the 1¾in headers, run the 3in system along the longer floor, and check clearance to the tunnel and rear subframe before completing it.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Does the PP5381-66 cover both Series I and Series II?
- Yes — it's listed to the WM-WN Statesman, Series I and Series II, with the 6.0/6.2 V8. Confirm your exact car with the workshop.
- Is it routed for the long-wheelbase body?
- Yes — it's the Statesman system, routed for the longer WM-WN floor rather than the shorter Commodore sedan.
- What system size is it?
- It's a 3in system with 1¾in primary 4-into-1 headers and a 4in collector.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Wagon 1 7/8 Tuned
PacemakerRRP$4891.13Pacemaker Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Wagon 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.