Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPH5000FA_SERIES_3_KIT
PH 5000 VS Series 3 Ute Manual - Getrag 5 Speed
PH 5000 VS Series 3 Ute Manual - Getrag 5 Speed.
BrandPacemaker
Category: Extractors and headers
RRP $1284.99 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PH5000FA_SERIES_3_KIT
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VS
- Stock status
- Confirmed on order
The Pacemaker PH5000FA_SERIES_3_KIT is an extractor kit listed to fit the Holden VS Series 3 Ute with the manual Getrag 5-speed. It's the headers stage of an exhaust upgrade, cut to suit the manual driveline.
What are extractors and what do they change?
Extractors, or headers, replace the cast factory exhaust manifold with separate tuned-length tubes for each cylinder before they merge into a collector. On the VS Series 3 ute the aim is a clearer path off the head than a one-piece casting allows, which tends to bring a fuller exhaust note with it. This kit is specified for the manual Getrag 5-speed, so it suits that gearbox and crossmember layout rather than the auto. We publish no power, flow or sound figures and won't quote any.
Will it suit my Holden VS Series 3 Ute?
It's listed to fit the Holden VS Series 3 Ute with the manual Getrag 5-speed. The ute tray, the Series 3 layout and the Getrag gearbox dictate the fit, and the auto cars take a different kit, so confirm your exact build and transmission with the workshop before ordering. We check the part against your vehicle first.
Is it road legal?
This is an extractor kit fitted at the manifold end of the system, ahead of the catalytic converter, so it can affect emissions compliance. No road-compliance approval is published by Pacemaker and we won't claim one. What a registered VS Series 3 ute needs in NSW depends on the rest of the system and state requirements, which we'll go through with you before fitting.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits Commodore and ute extractors in the Illawarra. We confirm the kit against your VS Series 3 manual, check it clears the Getrag gearbox and crossmember, fit fresh gaskets and seal the joints. RRP is listed at 1284.99 AUD; fitting is quoted once we've seen the car.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is the PH5000FA_SERIES_3_KIT for the manual?
- Yes — it's listed for the Holden VS Series 3 Ute with the manual Getrag 5-speed. The auto cars take a different kit, so confirm your transmission with the workshop before ordering.
- Is this a full exhaust or just the headers?
- It's the extractor (headers) kit — the manifold-end change, not a complete rear-section system. Ask the workshop about the rest of the run.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.