Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPH5000FM_KIT
PH 5000 Standard VN-VS 5L Manual
PH 5000 Standard VN-VS 5L Manual (SKU: PH5000FM_KIT), $1284.99 from Pacemaker. Engineered. Quality guaranteed.
BrandPacemaker
Category: Extractors and headers
RRP $1284.99 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PH5000FM_KIT
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VN VP VR
- Stock status
- Confirmed on order
Pacemaker PH5000FM_KIT is an extractor/header fitting kit listed to fit the Holden VN–VS, 5L engine. It's the kit hardware that goes with a Pacemaker header install on these Holdens rather than a full exhaust system.
What is this kit and where does it sit?
This is a header/extractor kit for the Holden VN–VS with the 5L engine. Extractors replace the cast factory manifolds at the front of the exhaust, and a kit like this is the matched hardware Pacemaker lists for that fitment on these Holdens. The exact contents — collectors, gaskets, fasteners — aren't itemised in this record, so we confirm what's in the box before ordering. We publish no flow, power or sound figures and won't quote any.
What does this listing cover?
Pacemaker lists this kit for the VN–VS range, 5L, 5L. Material, finish and tube sizing aren't published by Pacemaker in this record, so treat those as confirmed-on-order rather than assumed.
Will it suit my Holden?
It's listed to fit the Holden VN–VS, 5L; confirm the exact build with the workshop before ordering. so we check your specific car against the listing. Feed data can be imperfect, which is why we verify rather than assume.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits Pacemaker header kits in-house across the Illawarra. We remove the factory manifolds, fit the kit with fresh gaskets and torque it down, then check clearance on the hoist. Emissions and engineering requirements for older Holdens vary by build and by NSW rules, so we work those through with you rather than make a blanket claim. RRP is listed at 1284.99 AUD; fitting is quoted once we've seen the vehicle.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Will the PH5000FM_KIT fit my Holden?
- It's listed to fit the Holden VN–VS, 5L. Confirm your exact variant with the workshop before ordering.
- What comes in the kit?
- The exact kit contents aren't itemised in this listing, so we confirm what Pacemaker supplies in the box before you order.
- Can you fit it for me locally?
- Yes — the workshop supplies and fits this Pacemaker kit in-house. RRP is listed at 1284.99 AUD; fitting is quoted once we've seen the vehicle.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.