Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPH5000FV_KIT
PH 5000 VN-VS Calais Caprice and Statesman Variable Ratio 5L
PH 5000 VN-VS Calais Caprice and Statesman Variable Ratio 5L (SKU: PH5000FV_KIT), $1284.99 from Pacemaker. Engineered. Quality guaranteed.
BrandPacemaker
Category: Extractors and headers
RRP $1284.99 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PH5000FV_KIT
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VN VP VQ
- Stock status
- Confirmed on order
The Pacemaker PH5000FV_KIT is a header fitting kit listed to fit the Holden VN to VS 5L. It is the installation hardware that goes with an extractor change rather than the headers or exhaust pipework themselves, so it is described here as a kit, not as a full system.
What is a header fitting kit?
When extractors go on, the parts that actually seal and secure them, the gaskets, studs, nuts and small fasteners, matter as much as the headers do. A fitting kit like the PH5000FV_KIT gathers that hardware for a specific application so the install is not held up waiting on odd bits. The supplier does not publish a full component breakdown in this record, so we will not list pieces we cannot see; the workshop confirms exactly what is in the box against your job before fitting.
Which Holden does the PH5000FV_KIT suit?
This kit is listed to fit the Holden VN to VS 5L 5L. The Holden VN to VS is a long-running platform, and these older fitments in particular can vary with prior work, so "listed to fit" is the honest description rather than a promise. Confirm your exact Holden build with the workshop before ordering so the kit matches the headers you are running.
What does fitting involve at the Illawarra workshop?
Oak Flats Muffler Men handles extractor work in-house at our Illawarra workshop, and a fitting kit like this is part of doing that job properly, with fresh gaskets and fasteners on assembly instead of reusing tired ones. The PH5000FV_KIT is listed at $1,284.99 AUD. Bring the vehicle and the headers you are fitting and we will match the kit, check the flange faces and book it in. Anything that affects how the car is used or registered is talked through with you first.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Will the PH5000FV_KIT fit my Holden?
- It is listed to fit the Holden VN to VS 5L. Listings cannot account for every prior modification, so confirm your exact variant with the workshop before ordering.
- What is actually in this kit?
- The supplier does not publish a full parts list in our record, so we will not guess. It is the fitting hardware for an extractor install on this application; we confirm the contents against your job before fitting.
- What is the price on the PH5000FV_KIT?
- It is listed at $1,284.99 AUD. Pricing and availability are confirmed with the workshop, as some lines are brought in to order.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.