Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPH5005_Kit_VB
PH 5005 All post E.G.R Standard Red Motor 6 Cylinder VB Holden Commodore
PH 5005 All post E.G.R Standard Red Motor 6 Cylinder VB Holden Commodore.
BrandPacemaker
Category: Extractors and headers
RRP $747.59 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PH5005_Kit_VB
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VB
- Stock status
- Confirmed on order
Pacemaker PH5005_Kit_VB is a header kit for the six-cylinder red-motor Holden Commodore in VB form, covering the post-EGR standard engine. The point of difference here is that it's a complete kit — the PH5005 headers plus the extra pipework and hardware to finish the install on that early Commodore six.
What does the kit include over bare headers?
A header kit bundles the PH5005 headers with the additional pipework and fitting hardware needed to complete the section, rather than just the extractors on their own. On the VB Commodore six that means the parts to tie the headers into the rest of the system are accounted for in the one listing, which is what 'kit' signifies here.
Which engine is this cut for?
It's listed for the standard red-motor six-cylinder in the VB Commodore, post-EGR. The red motor is the early Holden in-line six, and the post-EGR qualifier matters because the emissions plumbing on those engines changed the manifold area — so the kit is specified to the post-EGR standard engine rather than every red-motor variant.
Will it suit my VB Commodore?
It's listed to fit the Holden VB Commodore with the standard post-EGR red-motor six. The supplier doesn't publish a build year against the listing, so we treat it as listed-to-fit and confirm the engine and its EGR configuration on your car before ordering, since that's the deciding detail on these early sixes.
Road legality and fitting at our Illawarra workshop
This is a header kit — fabricated pipework, not a certified catalytic converter or muffler — so road compliance depends on how the full system is configured and signed off to NSW requirements. Oak Flats Muffler Men fits Pacemaker header kits like this across the Illawarra. Listed RRP is 747.59 AUD, with the fitting charge quoted once the car is in the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is the PH5005_Kit_VB just the headers?
- It's a kit — the PH5005 headers plus the pipework and hardware to complete the section on the VB Commodore six. We confirm the post-EGR red-motor fitment before ordering.
- Which engine does it suit?
- The standard post-EGR red-motor six-cylinder in the Holden VB Commodore. Send your engine details and we'll verify the match.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.