Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPH5008_Kit_VC-VK
PH 5008 Blue and Black Motor 6 Cylinder Commodore VC to VK
PH 5008 Blue and Black Motor 6 Cylinder Commodore VC to VK (SKU: PH5008_Kit_VC-VK), $744.94 from Pacemaker. Engineered. Quality guaranteed.
BrandPacemaker
Category: Extractors and headers
RRP $744.94 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PH5008_Kit_VC-VK
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VC VH VK
- Stock status
- Confirmed on order
Pacemaker PH5008_Kit_VC-VK is a header kit for the six-cylinder blue- and black-motor Holden Commodore, covering the VC through VK range. The kit format is the distinguishing feature — the PH5008 headers plus the pipework and hardware to complete the install across those early Commodore sixes.
What does the kit include?
A header kit bundles the PH5008 headers with the additional pipework and fitting hardware needed to finish the section, rather than the extractors on their own. Across the VC-to-VK Commodore six that means the parts to tie the headers into the rest of the system come in the one listing — which is what 'kit' signifies here.
Which engines does it cover?
It's listed for the blue-motor and black-motor six-cylinder in the Commodore, VC through VK. The blue and black motors are the later development of Holden's in-line six that followed the red motor, and this kit is specified to those engines across that VC-to-VK span rather than the earlier red-motor cars.
Will it suit my Commodore?
It's listed to fit the Holden Commodore VC to VK with the blue- or black-motor six. The supplier publishes no individual build year, so we treat it as listed-to-fit and confirm the engine and series on your car before ordering, since the blue/black-motor distinction is the deciding detail on these sixes.
Road legality and fitting at our Illawarra workshop
This is a header kit — fabricated pipework, not a certified catalytic converter or muffler — so road compliance depends on how the full system is configured and signed off to NSW requirements. Oak Flats Muffler Men fits Pacemaker header kits like this across the Illawarra. Listed RRP is 744.94 AUD, with the fitting charge quoted once the car is in the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is the PH5008_Kit_VC-VK just the headers?
- It's a kit — the PH5008 headers plus the pipework and hardware to complete the section across the VC-to-VK Commodore six.
- Which engines does it suit?
- The blue-motor and black-motor six-cylinder in the Holden Commodore, VC through VK. Send your engine and series and we'll verify the match.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.