Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPH5015_L_R
PH 5015 VL 5 Litre V8 Automatic Only
PH 5015 VL 5 Litre V8 Automatic Only.
BrandPacemaker
Category: Extractors and headers
RRP $1354.67 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PH5015_L_R
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VL
- Stock status
- Confirmed on order
The Pacemaker PH5015_L_R is a set of extractors (headers) listed to fit the Holden VL 5-litre V8, automatic only. Pipe diameter and material aren't published in this listing.
What is this part?
This is an extractor (header) set — a left-and-right pair that replaces the factory cast exhaust manifolds with tuned primary tubes. On the PH5015_L_R, those tubes gather each cylinder's exhaust pulse and merge them into the collector at the front of the exhaust. It's the manifold-section part for this Holden VL V8 rather than a rear-section or tailpipe change. The system diameter and tube material aren't published by the supplier for this listing.
What do tuned extractors change?
Extractors are an engine-back change. The trade-off is character and effort: a tuned set can free up exhaust flow off each cylinder compared with a restrictive cast manifold, but the tubes sit close to the engine and are more involved to fit than a bolt-on muffler. A header change can also shift the note louder than stock. This set is sized for the VL 5-litre V8 rather than being a universal part, which is why it's listed against the vehicle and noted as automatic only — the transmission affects clearances around the headers.
Will it suit my Holden VL?
It's listed to fit the Holden VL 5-litre V8, automatic only. Feed data can be imperfect, so confirm your engine and transmission with the workshop before ordering — this set is listed for the automatic, and a manual car would need a different check.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits extractor sets like the PH5015_L_R in-house across the Illawarra. Headers sit tight to the engine, steering and chassis, so we check clearances, gaskets and sensor bungs before the hoist. It's listed at $1,354.67 RRP and is typically a special-order item, so send your registration or build details and we'll confirm the part and lead time. On emissions: headers change the manifold section, so road compliance depends on your state's requirements — confirm what's needed for NSW registration with us before fitting.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Will the PH5015_L_R fit my Holden VL V8?
- It's listed to fit the Holden VL 5-litre V8, automatic only. Confirm your engine and transmission with the workshop before ordering, as fitment data can be imperfect.
- What pipe size are these extractors?
- The pipe diameter isn't published by the supplier for this listing. We can confirm the specification with you before ordering.
- Are extractors legal for road use in NSW?
- Extractors replace the manifold section, so road compliance depends on your state's rules. We can talk through NSW registration requirements before you commit.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.