Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPH5019_L_R_B
PH 5019 3.8 Buick V6 VN-VR Auto / Manual with Base Kit
PH 5019 3.8 Buick V6 VN-VR Auto / Manual with Base Kit. (PH5019_L_R_B) at $1105.65 RRP from Pacemaker. Fast shipping.
BrandPacemaker
Category: Extractors and headers
RRP $1105.65 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PH5019_L_R_B
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VN VP VR
- Stock status
- Confirmed on order
The Pacemaker PH5019_L_R_B is a set of extractors (headers) listed to fit the Holden VN to VR 3.8 Buick V6, automatic or manual, supplied with the base kit. Pipe diameter and material aren't published in this listing.
What is this part?
This is an extractor (header) set — a left-and-right pair, listed here with the base kit — that replaces the factory cast exhaust manifolds with tuned primary tubes. On the PH5019_L_R_B those tubes collect each cylinder's exhaust pulse and merge them at the collector. It's the manifold-section part for this Holden 3.8 Buick V6 rather than a rear-section or tailpipe change. The system diameter and tube material aren't published by the supplier for this listing.
What do tuned extractors change, and what's the base kit?
Extractors are an engine-back change: a tuned set can free up exhaust flow off each cylinder compared with a restrictive cast manifold, but the tubes sit close to the engine and are more involved to fit than a bolt-on muffler, and the note can shift louder than stock. The base kit refers to the supporting fitting components listed with the headers. This set covers both automatic and manual cars, but transmission still affects clearances, so it's listed against the specific vehicle rather than being a universal part.
Will it suit my Holden V6?
It's listed to fit the Holden VN to VR 3.8 Buick V6, automatic or manual. Feed data can be imperfect, so confirm your engine and series with the workshop before ordering — the VN-to-VR span ran detail changes that affect which header set is correct.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits extractor sets like the PH5019_L_R_B in-house across the Illawarra. Headers sit tight to the engine, steering and chassis, so we check clearances, gaskets and sensor bungs before the hoist. It's listed at $1,105.65 RRP and is typically a special-order item, so send your registration or build details and we'll confirm the part and lead time. On emissions: headers change the manifold section, so road compliance depends on your state's requirements — confirm what's needed for NSW registration with us before fitting.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Will the PH5019_L_R_B fit my Holden VN to VR V6?
- It's listed to fit the Holden VN to VR 3.8 Buick V6, automatic or manual. Confirm your engine and series with the workshop before ordering, as fitment data can be imperfect.
- What's included in the base kit?
- It's listed as the extractor set with the base kit of supporting fitting components. We confirm the exact contents with you before ordering.
- Are extractors road legal in NSW?
- Extractors replace the manifold section, so road compliance depends on your state's rules. We can talk through what NSW registration needs before you fit them.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.