Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPH5061_L_R
PH 5061 Supercharged Ecotec VT-VY Commodore & WH-WK Statesman Competition Headers
PH 5061 Supercharged Ecotec VT-VY Commodore & WH-WK Statesman Competition Headers (SKU: PH5061_L_R), $979.26 from Pacemaker.
BrandPacemaker
Category: Extractors and headers
RRP $979.26 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PH5061_L_R
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VT VX VY
- Stock status
- Confirmed on order
The Pacemaker PH5061_L_R is a left-and-right pair of competition headers listed to fit the supercharged Ecotec Holden VT–VY Commodore and WH–WK Statesman. Detailed dimensions for this set are not published by the supplier.
What are competition headers and what do they change?
Headers, also called extractors, replace the cast factory exhaust manifolds with separate tubular runners from each cylinder, the aim being to let the engine breathe out with less restriction than the cast originals. The PH5061_L_R is described as a competition header set and is supplied as a left-and-right pair, as the L_R in the part number shows. It changes the exhaust side of the engine, not anything internal.
What does the supercharged-Ecotec listing tell us?
This set is listed against the supercharged Ecotec version of the Holden VT–VY Commodore and WH–WK Statesman, so it is matched to that forced-induction engine rather than the naturally aspirated one. That distinction matters: confirm with the workshop that your car is the supercharged Ecotec variant the part is listed against before ordering.
What isn't published for this part?
The supplier doesn't publish primary tube size, system diameter, or material for the PH5061_L_R in this record, so we won't quote figures we don't have. What we can confirm is that it is a competition-spec left-and-right header pair for the supercharged Ecotec Commodore and Statesman; the workshop confirms the remaining specifics against your car.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits header pairs like the PH5061_L_R in-house across the Illawarra. The job needs good access to drop both factory manifolds and fresh gaskets each side. Supplied by Pacemaker at $979.26 AUD; send us your supercharged Commodore or Statesman details and we'll confirm the fit.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What does the PH5061_L_R fit?
- It is listed to fit the supercharged Ecotec Holden VT–VY Commodore and WH–WK Statesman. Confirm your exact variant with the workshop before ordering.
- What are the header dimensions?
- Primary and system sizes are not published by the supplier for this set; the workshop confirms the specifics against your car.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.