Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPH5069L_R
PH 5069 Alloytec V6 VZ Commodore and WL Statesman
PH 5069 Alloytec V6 VZ Commodore and WL Statesman (SKU: PH5069L_R), $936.44 from Pacemaker. Engineered. Quality guaranteed.
BrandPacemaker
Category: Extractors and headers
RRP $936.44 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PH5069L_R
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VZ WL
- Stock status
- Confirmed on order
Pacemaker PH5069L_R is a left-and-right header pair for the Alloytec V6 — listed for the VZ Commodore and WL Statesman. As a V6 direct-fit pair (the L and R in the part number), it's a different animal to the V8 tube-and-system packages: a bolt-to-the-head extractor set for the six.
What is the L_R pair?
PH5069L_R supplies the left and right header banks for the Alloytec V6, which is a vee engine with a cylinder head each side. The L and R in the MPN are the two extractors that replace the factory manifolds on each bank. Pacemaker lists it for the Holden VZ Commodore and the WL Statesman; we treat that as listed-to-fit and confirm on the car.
What does a V6 header set change?
Each factory bank uses a cast manifold; this pair replaces both with tubular extractors that give each cylinder a cleaner path off the head. On an Alloytec V6 it's the standard first step for freeing the exhaust side. Pacemaker doesn't publish a primary tube diameter, system bore or material for this listing, so we don't put numbers to those — it's the direct-fit header pair, sold to bolt to the factory location.
Is it road legal?
These are tubular headers, not a catalytic converter or muffler, so there's no emissions device certified inside them. Whether your VZ Commodore or WL Statesman stays compliant depends on what runs downstream and how the system is signed off to NSW requirements, which we go through per car. Pacemaker publishes no compliance approval for the pair and we won't imply one.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits Alloytec V6 header pairs like this across the Illawarra. We match PH5069L_R to your VZ Commodore or WL Statesman, fit both banks, and seal each port with fresh gaskets. Listed RRP is 936.44 AUD; the fitting charge is quoted with the car on the hoist.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Does PH5069L_R include both sides?
- Yes — the L_R designation is the left and right header pair for the Alloytec V6's two banks.
- Which cars is it listed for?
- The Holden VZ Commodore and WL Statesman with the Alloytec V6. Confirm your exact build with us before ordering.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.