Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPH5080_L_R
PH 5080 VE Alloytec V6 2006 - 2012
PH 5080 VE Alloytec V6 2006 - 2012.
BrandPacemaker
Category: Extractors and headers
RRP $789.22 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PH5080_L_R
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VE WM
- Stock status
- Confirmed on order
Pacemaker PH5080_L_R is the left-and-right header pair for the VE Alloytec V6, listed for 2006–2012. The VE-era model years are the distinguishing detail — this is the later-platform six's direct-fit pair, separate from the VZ-generation listing.
Which Alloytec V6 does this suit?
PH5080_L_R is listed for the VE Alloytec V6 across 2006–2012. Those model years are the dividing line: the VE platform's engine bay and mounting differ from the earlier VZ cars, so the header pair is cut for the VE. Pacemaker lists it as the Holden VE Alloytec set; we treat that as listed-to-fit and confirm on the vehicle.
What does the L_R pair replace?
The Alloytec is a vee six with a head each side, and this pair supplies the left and right tubular extractors that replace both factory cast manifolds. On a VE V6 that's the usual first move on the exhaust side, giving each cylinder a cleaner run off the head. Pacemaker doesn't publish a primary diameter, system bore or material for this listing, so we hold those as unknown rather than guess.
Is it road legal?
These are tubular headers — not a catalytic converter or muffler — so the part itself carries no certified emissions device. Whether a 2006–2012 VE V6 stays compliant comes down to what's downstream and how the full system is engineered to NSW requirements, which we cover per car. Pacemaker publishes no approval for the pair and we won't suggest one exists.
How does Oak Flats fit it?
Oak Flats Muffler Men fits VE Alloytec header pairs like this across the Illawarra. We match PH5080_L_R to your 2006–2012 VE V6, fit both banks, and seal each port fresh. Listed RRP is 789.22 AUD; the labour is quoted with the car on the hoist.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What years and engine is PH5080_L_R for?
- The VE Alloytec V6, listed for 2006–2012. Confirm your exact build with the workshop first.
- Is it a pair or a single side?
- A pair — the L_R designation covers both the left and right header banks for the V6.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.