Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPH5260_L_R
PH 5260Torana LH-LX 304 (5.0) V8 E.F.I. Head (Auto Only) 1 5/8"
PH 5260Torana LH-LX 304 (5.0) V8 E.F.I. Head (Auto Only) 1 5/8".
BrandPacemaker
Category: Extractors and headers
RRP $1202.80 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PH5260_L_R
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden LH LX
- Stock status
- Confirmed on order
The Pacemaker PH5260_L_R is a left-and-right pair of 1-5/8in headers in 304 stainless steel, listed to fit the Holden Torana LH/LX with the 304 5.0 V8 EFI head, automatic only. The published RRP is $1202.80 AUD.
What does this part cover?
This is a bare header set — a left and right pair of 1-5/8in primary tubes in 304 stainless steel — for the Holden Torana LH/LX fitted with the 304 5.0 V8 EFI head, and listed for automatic cars only. The 1-5/8in figure is the primary tube size and the 304 stainless is the listed material. It replaces the factory cast manifolds; it isn't a complete exhaust, so the system behind it is separate.
What are headers and what do they change?
Headers, or extractors, swap the cast manifolds for individual tubes that merge in a collector, letting each cylinder breathe through its own runner. On a small Holden V8 like the Torana's 304, a 1-5/8in primary is a road-oriented size. Building them in 304 stainless is about corrosion resistance and longevity. They change exhaust flow and note versus the cast manifolds; we hold no power or sound figures for this part.
Will it suit my Torana?
It's listed to fit the LH/LX Torana with the 304 5.0 V8 EFI head and is noted automatic only — so the gearbox and head spec matter here. Confirm your exact car and head with the workshop before ordering, as header clearance on the Torana is tight and sensitive to the driveline. We check against the car rather than the listing alone.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits Pacemaker header sets in-house across the Illawarra. On an LH/LX Torana that means working in a tight engine bay to land both sides and clear the steering and chassis. Send your Torana's details — head, transmission and any prior changes — and we'll confirm the fit, the lead time on this Pacemaker line and book the bay. It's listed to fit rather than guaranteed for every variant.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Will the PH5260_L_R fit my LH/LX Torana?
- It's listed to fit the LH/LX Torana with the 304 5.0 V8 EFI head, automatic only. Confirm your head and gearbox with Oak Flats Muffler Men before ordering.
- What are these made from?
- The listing specifies 304 stainless steel, with a 1-5/8in primary tube size.
- Is a full exhaust included?
- No — this is the header pair only. The system behind it is separate, and we can advise on it when you book.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.