Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPH5302_L_R
PH 5302 Chevrolet 283-400 Small Block V8 1 5/8" Tri-Y To Suit Holden HK-HT-HG
PH 5302 Chevrolet 283-400 Small Block V8 1 5/8" Tri-Y To Suit Holden HK-HT-HG (SKU: PH5302_L_R), $1159.44 from Pacemaker.
BrandPacemaker
Category: Extractors and headers
RRP $1159.44 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PH5302_L_R
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden HG HK HT
- Stock status
- Confirmed on order
The Pacemaker PH5302_L_R is a left-and-right pair of 1-5/8in Tri-Y headers for the Chevrolet 283–400 small-block V8, listed to suit the Holden HK/HT/HG. The published RRP is $1159.44 AUD.
What does this part cover?
This is a bare header pair — left and right 1-5/8in Tri-Y headers — built for the Chevrolet 283–400 small-block V8 and listed to suit Holden HK/HT/HG cars running that engine. The 1-5/8in figure is the primary tube size from the listing. It replaces the cast manifolds; it isn't a full exhaust, so the system behind it is separate.
What is a Tri-Y header and what does it change?
A Tri-Y header pairs the primary tubes before the final collector rather than running straight four-into-one. On a small-block Chevy in an HK/HT/HG, that layout is chosen for a broad spread of response on the road. It swaps the cast manifolds for tuned tubes and changes exhaust flow and note; we publish no power or sound data for it. The 1-5/8in primary is a road-oriented size for this engine family.
Will it suit my HK/HT/HG?
It's listed for the Chevrolet 283–400 small-block as fitted to the Holden HK/HT/HG. Engine size within that 283–400 range, plus steering and chassis clearance, all matter, so confirm your exact combination with the workshop first. Header fitment in these early Holdens is tight, and we verify against the car rather than the listing alone.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits Pacemaker Tri-Y headers in-house across the Illawarra. On an HK/HT/HG with a small-block Chev, that means landing both sides in a tight bay and clearing the steering. Tell us your engine and any prior changes and we'll confirm the fit, the lead time on this Pacemaker line and book it in. It's listed to suit rather than guaranteed for every variant.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Will the PH5302_L_R suit my HK/HT/HG?
- It's listed to suit the Holden HK/HT/HG running a Chevrolet 283–400 small-block V8. Confirm your engine and clearances with Oak Flats Muffler Men before ordering.
- What engines does it cover?
- The listing names the Chevrolet 283–400 small-block V8 range. We'll confirm the exact match for your build.
- Is a complete exhaust included?
- No — this is the Tri-Y header pair only. The rest of the system is separate and we can advise when you book.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.