Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPH5361_L_R_VY_Series_2
PH 5361 VY Series II Commodore/ WK Series II Statesman Gen III
Pacemaker PH 5361 VY Series II Commodore/ WK Series II Statesman Gen III.
BrandPacemaker
Category: Extractors and headers
RRP $1461.67 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PH5361_L_R_VY_Series_2
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VY WH WK
- Stock status
- Confirmed on order
The Pacemaker PH5361_L_R_VY_SERIES_2 is a left-and-right Gen III header (extractor) set listed to fit the VY Series II Holden Commodore and WK Series II Statesman. RRP is $1,461.67 AUD.
What does this set cover?
This is the PH5361_L_R_VY_SERIES_2 header pair for the Gen III V8 in the Series II Commodore and Statesman, covering the left and right banks. It replaces the cast factory manifolds with tubular runners at the cylinder heads — the front end of the exhaust, not the rear.
What is a header and why is series matched so carefully?
A header (extractor) replaces the restrictive cast manifold with tubular primaries gathered into a collector. These Holdens changed details between Series 1 and Series II, which is why Pacemaker lists this set specifically to the Series II car — fitting the wrong series is the classic mismatch on these. Headers change how the engine breathes and shift emissions hardware downstream; we don't publish power or sound numbers because Pacemaker doesn't supply them for this set.
Will it suit my Series II Commodore or Statesman?
It's listed to fit the VY Series II Holden Commodore and WK Series II Statesman with the Gen III engine. Confirm your car is the Series II build with the workshop before ordering, since listings can be imperfect.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits Pacemaker headers in-house across the Illawarra. For a left-and-right Series II set we work both banks, fit fresh gaskets, check the join downstream and confirm compliance for your registration before booking the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Will the PH5361_L_R_VY_SERIES_2 fit my VY Series 1?
- No — this set is listed for the Series II car. The Series 1 VT–VY uses a different Pacemaker part. Confirm your series with the workshop.
- Does it cover both banks?
- Yes — it's a left-and-right header set for the Gen III V8.
- Is it just the extractors?
- Yes — it's the header set at the heads, not the complete exhaust.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.