Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPH5362_L_R_VT-VY_SERIES_1
PH 5362 VT-VY Series 1 Commodore/ WH-WK Series 1 Statesman Gen III Competition Header
Pacemaker PH 5362 VT-VY Series 1 Commodore/ WH-WK Series 1 Statesman Gen III Competition Header.
BrandPacemaker
Category: Extractors and headers
RRP $1362.53 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PH5362_L_R_VT-VY_SERIES_1
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VT VX VY
- Stock status
- Confirmed on order
The Pacemaker PH5362_L_R_VT-VY_SERIES_1 is a left-and-right Gen III competition header (extractor) set listed to fit the VT–VY Series 1 Holden Commodore and WH–WK Series 1 Statesman. RRP is $1,362.53 AUD.
What does this set cover?
This is the PH5362_L_R_VT-VY_SERIES_1 competition-spec header pair for the Gen III V8 in the Series 1 Commodore and Statesman, covering both banks. It replaces the cast factory manifolds with tubular runners at the cylinder heads.
What is a competition header and how does it differ?
A header (extractor) swaps the restrictive cast manifold for tubular primaries gathered into a collector. Pacemaker lists this set as a competition header, distinguishing it from the standard PH5361 extractor for the same cars — a different spec aimed at a different build intent. Headers change how the engine breathes and shift emissions hardware downstream, so a competition-spec set is a deliberate choice. We don't quote power or sound figures because Pacemaker doesn't publish them for this set.
Will it suit my Series 1 Commodore or Statesman?
It's listed to fit the VT–VY Series 1 Holden Commodore and WH–WK Series 1 Statesman with the Gen III engine. Confirm your car is Series 1 with the workshop before ordering, since listings can be imperfect.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits Pacemaker headers in-house across the Illawarra. A left-and-right competition set means working both banks, fresh gaskets and checking the downstream join, plus confirming compliance and intended use for your registration before we book the bay. At $1,362.53 AUD this is a special-order header set, so we confirm fitment and lead time with you before placing the order rather than holding it on the shelf.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- How is the PH5362_L_R_VT-VY_SERIES_1 different from the standard extractor?
- It's Pacemaker's competition-spec header for the same Series 1 cars, a different spec from the standard PH5361 set.
- Does it include both banks?
- Yes — it's a left-and-right header set for the Gen III V8.
- Will it fit my Series II?
- No — this set is listed for the Series 1 car. Confirm your series with the workshop.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.