Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPH5362_L_R_VZ_5.7L
PH 5362 VZ Commodore and WL Statesman/Caprice Gen III 5.7L Competition Header
PH 5362 VZ Commodore and WL Statesman/Caprice Gen III 5.7L Competition Header.
BrandPacemaker
Category: Extractors and headers
RRP $1461.67 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PH5362_L_R_VZ_5.7L
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VZ WL
- Stock status
- Confirmed on order
The Pacemaker PH5362_L_R_VZ_5.7L is a left-and-right competition header set listed to fit the Holden VZ Commodore and WL Statesman/Caprice with the Gen III 5.7L V8. It's the extractor stage of the system, priced at $1,461.67 AUD.
What does this header set cover?
The PH5362_L_R_VZ_5.7L is supplied as a paired left and right header set — the tubular extractors that bolt to the cylinder heads in place of the cast factory manifolds. Pacemaker lists it as a competition header for the 5.7L Gen III, so it sits right at the front of the exhaust, where the gases leave the heads. It's the extractor part of the build rather than a full rear system; the diameter and material aren't published by the supplier, so we don't quote them.
What is a competition header and what does it change?
A header (extractor) swaps the heavy cast manifold for tubular runners that gather each bank of cylinders. A competition-spec set is built for a freer-flowing layout than the factory part, which changes how the V8 breathes and how it sounds compared with stock. The honest trade-off is that competition headers are an enthusiast upgrade, not a quiet bolt-on — and we don't publish power or sound numbers because Pacemaker doesn't supply them for this listing.
Will it suit my VZ Commodore or WL Statesman?
It's listed to fit the Holden VZ Commodore and the WL Statesman and Caprice running the Gen III 5.7L. Feed data can be imperfect, so confirm your exact build — engine, gearbox and any earlier modifications — with the workshop before ordering. As a paired left-and-right set, fitment is checked side by side.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits Pacemaker headers in-house across the Illawarra. For a competition header set we check head-flange seating, runner clearances and how the collectors meet the rest of the system before booking the bay. Compliance for a competition-labelled part depends on your vehicle and registration, so we confirm what's required with you up front rather than assume it.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Does the PH5362_L_R_VZ_5.7L include a full exhaust?
- No — it's a left-and-right competition header set, the extractors only, not a complete rear system. We can advise on matching pipework when you book.
- Will it fit my VZ Commodore 5.7L?
- It's listed to fit the VZ Commodore and WL Statesman/Caprice with the Gen III 5.7L. Confirm your exact build with the workshop before ordering.
- Is a competition header road legal?
- That depends on your vehicle and registration. We confirm what's required with you before fitting rather than make a blanket claim.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.