Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPH5362_L_R_VZ_6L
PH 5362 VZ Commodore/ WL Statesman LS2 6L Competition Header
PH 5362 VZ Commodore/ WL Statesman LS2 6L Competition Header (SKU: PH5362_L_R_VZ_6L), $1560.83 from Pacemaker. Engineered. Quality guaranteed.
BrandPacemaker
Category: Extractors and headers
RRP $1560.83 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PH5362_L_R_VZ_6L
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VZ WL
- Stock status
- Confirmed on order
The Pacemaker PH5362_L_R_VZ_6L is a left-and-right competition header set listed to fit the Holden Commodore 6L. As a competition-spec header it's aimed at the build end of the spectrum, replacing the factory cast manifolds on the V8.
What is a competition header?
A competition header is a tube extractor built for performance builds rather than as a like-for-like manifold swap. The PH5362_L_R_VZ_6L is a left-and-right pair that replaces the factory cast manifolds on the Holden Commodore 6L V8, routing each bank through individual runners to a collector. We publish no flow, power or sound figures and won't quote any — what it changes is the manifold design.
Will it suit my Holden Commodore?
It's listed to fit the Holden Commodore 6L. Header fitment is tied to the engine and exactly what's on the car, so we confirm the PH5362_L_R_VZ_6L against your build before ordering. Send us the details and we'll check the runner and collector clearances suit.
Is it road legal?
This is a competition header — a manifold replacement, not a catalytic converter or muffler. Competition-spec parts and how the rest of the system is configured both bear on NSW road compliance, and we go through that with you. No compliance approval is published by the supplier and we won't imply one.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits Pacemaker competition headers across the Illawarra. We work the left and right sets in around the V8, check steering and crossmember clearance, fit fresh gaskets and seal the collector joints. RRP is listed at 1560.83 AUD; fitting is quoted once we've seen the vehicle.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is this a pair of headers?
- Yes — the PH5362_L_R_VZ_6L is a left-and-right competition header set for the Holden Commodore 6L V8.
- Is it road legal?
- It's a competition header, a manifold replacement. Road compliance depends on the rest of the system and NSW requirements — we go through that with you. No approval is published by the supplier.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.